Page 25 of 68 FirstFirst ... 151617181920212223242526272829303132333435 ... LastLast
Results 241 to 250 of 677
Like Tree3Likes

Thread: Android Ultimate In-Car OEM System - Remote Bluetooth Touch, HDMI Mirroring

  1. #241
    Newbie
    Join Date
    Jun 2012
    Posts
    12
    Quote Originally Posted by customGadz View Post
    We have been looking for a connector for that. Could you tell us what the pitch of the pins are.. It looks like 1.5 or 2mm. The ribbon that you hand next to it looks like a 1mm pitch. Let us know.
    Okay this will give you the answer,the first picture is my Oem Cable and the Cable you supplied to me that connect the x2modual and the switch


    The second picture my Oem cable fit inside the main slot of the switch perfectly that connect the x2modual and the switch


    So the switch should have the same white connector from the three side, and if it possible could you supply me a 20cm long ribbon cable

  2. #242
    Newbie
    Join Date
    Nov 2011
    Posts
    11
    Quote Originally Posted by customGadz View Post
    Ok, I see the issue. When we took the modules of pre-order we didnt replace the touchscreen selections. If you place an order and make a clear note that you want the 8" we will include it for you.




    Disabling the gestures is not too much effort. Since ICS it looks like the "back" and "setting" gestures are not required . WIll still leave the code in there in case for all you running pre ICS software.
    If you have already purchased PM me with your order Number and which touchscreen you require and we will see if they are in stock.


    We are currently shipping everyone with a v1.4 with a v1.5 bootloader software. The APK i will post will not work with v1.4 anyway I will keep you guys posted.
    Hi, my order was order 23 and when I pair up the touchscreen with my phone it shows that it is version 1.4. I have gone through the firmware steps as outlined but cannot get to the screen to select the resolution changes, nor can I get the X2 calibration to work. Having read your post, I believe this is because I was shipped an early version, is that correct, and how would I update the the latest version?

  3. #243
    Newbie
    Join Date
    Jun 2012
    Posts
    7
    Yo dudes, do you have an ETA for more stock of these bad boys?

    I want to buy one ASAP.

  4. #244
    FKA CivicModz
    Join Date
    Mar 2011
    Location
    Australia
    Posts
    385
    Quote Originally Posted by alisultan View Post
    Okay this will give you the answer,the first picture is my Oem Cable and the Cable you supplied to me that connect the x2modual and the switch


    The second picture my Oem cable fit inside the main slot of the switch perfectly that connect the x2modual and the switch


    So the switch should have the same white connector from the three side, and if it possible could you supply me a 20cm long ribbon cable
    Ok, it is much more clear now. Thanks for that.. We will make up a special adapter for you.... Will send you out soon

  5. #245
    Newbie
    Join Date
    Apr 2006
    Posts
    5
    Im starting to think that this project will never end. I cant get switcher to take control of the touch inputs, even when I add 12v. I also am dealing with a bad solder joint on the switcher itself. I guess this could be the problem, but who knows . I wish i could be sure of which part was bad so that I knew which one to get replaced. Its driving me crazy. I dropped 600+ in a head unit and other parts to make this happen, and now its starting to look like a waste.

  6. #246
    FKA CivicModz
    Join Date
    Mar 2011
    Location
    Australia
    Posts
    385
    Quote Originally Posted by defe View Post
    Im starting to think that this project will never end. I cant get switcher to take control of the touch inputs, even when I add 12v. I also am dealing with a bad solder joint on the switcher itself. I guess this could be the problem, but who knows . I wish i could be sure of which part was bad so that I knew which one to get replaced. Its driving me crazy. I dropped 600+ in a head unit and other parts to make this happen, and now its starting to look like a waste.
    Hi, Sorry to hear of your problem.

    1. did you connect the switcher exactly as stated in the latest manual?
    2. Does the RED led on the switcher turn on/off when you connect/disconnect switcher cable?

    If you bend the black connectors by accident a few times they solder joint will probably go bad. If this is the case you can resolder the 2 black 4-pin connectors on the switcher. If you don't want to do this, we can send you out another one.

  7. #247
    Low Bitrate
    Join Date
    Aug 1999
    Posts
    82
    Can you give me an ETA on when I might expect order #102??

    Also, Happy 4th of July everyone!

  8. #248
    Newbie
    Join Date
    Apr 2006
    Posts
    5
    I get no led on the switcher when it is connected. I am also uncomfortable trying to solder such a small surface mounted component..
    Order #76.

  9. #249
    Newbie
    Join Date
    Oct 2011
    Posts
    16
    Has anyone had success getting it to Work?

    Sent from my MB860 using Tapatalk 2

  10. #250
    Newbie
    Join Date
    Jun 2012
    Posts
    12
    Quote Originally Posted by customGadz View Post
    Ok, it is much more clear now. Thanks for that.. We will make up a special adapter for you.... Will send you out soon
    Hi
    any news a bout my adapter

Similar Threads

  1. Lilliput FA1012-NP/C/T 10.1" LCD Touch Screen Monitor With Multi Touch DVI HDMI Revie
    By jake5253 in forum MP3Car Products - store.mp3car.com
    Replies: 5
    Last Post: 05-09-2012, 01:28 AM
  2. Android OBD Bluetooth Reader
    By broken87262 in forum Engine Management, OBD-II, Engine Diagnostics, etc.
    Replies: 2
    Last Post: 05-03-2010, 06:17 PM
  3. Liliput 10" HDMI touch - any info?
    By HoSS in forum LCD/Display
    Replies: 2
    Last Post: 12-07-2009, 09:33 AM
  4. Replies: 22
    Last Post: 04-23-2006, 03:15 PM
  5. Ultimate System
    By dark_muppet in forum Power Supplies
    Replies: 31
    Last Post: 03-18-2004, 06:37 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •