Android Ultimate In-Car OEM System - Remote Bluetooth Touch, HDMI Mirroring

Quote:

---

Originally Posted by davedave1234

Quick question about connectivity. Can this be used with a BT Serial port at the same time? The reason I ask is I am considering looking into conecting the HDzoom HD radio to the phone through BT so I can have HD radio if I am in a area that has bad reception. I have found some info on how to comunicate with it through serial and I would assume it can be done from a phone with the proper code. I am looking into using this product as it will give access to UART and IO ports through the same connection that might be able to be connected to steering wheel controls. Or for an even cheaper option something like this.

Dave

---

Yes, you should be able to connect other bluetooth devices without any issues. Just try not to connect to many devices as you might notice some skipping while using A2DP (this depends on device used).

Quote:

---

Originally Posted by customGadz

Yes, you should be able to connect other bluetooth devices without any issues. Just try not to connect to many devices as you might notice some skipping while using A2DP (this depends on device used).

---

Thanks for the reply, I am not going to be using A2DP since I have to physicaly connect the MHL (galaxy S2 Skyrocket) anyway I am just going to strip the audio out and plug into the AUX in on the car. Any update on the shipping? Does it still look like 1 1/2 weeks or so?

Sorry I am a little slow and have a few questions... I have a 2011 Chrysler Town and country with all of the bells and whistles DVD entertainment system. From the factory I have multiple video inputs that are composite. I assume I can just tap one of the existing inputs but does that mean I just simply have to select that input to use this device to see my galaxy tab 10.1? Also how do I find out without ripping apart the dash to see what type of touchscreen cable I have for the switcher? I have the factory 430n head unit. And because I am using my tablet instead of my phone I assume my Bluetooth pairing will remain working for the factory hands free? Thanks and cool product!

I am ready to jump on two of these.

Are there any know issues with using my Sprint EVO 3D like there are with the EVO 4? Also are there any known issues with a using the touchscreen in a JVC KW-AVX800, which I have been JVC uses a 4wire panel?

Quote:

---

Originally Posted by davedave1234

Thanks for the reply, I am not going to be using A2DP since I have to physicaly connect the MHL (galaxy S2 Skyrocket) anyway I am just going to strip the audio out and plug into the AUX in on the car. Any update on the shipping? Does it still look like 1 1/2 weeks or so?

---

Yes, it still a couple weeks away.. All the new switcher addons are ready, just waiting for production to finish.

Quote:

---

Originally Posted by IssaquahWA1979

Sorry I am a little slow and have a few questions... I have a 2011 Chrysler Town and country with all of the bells and whistles DVD entertainment system. From the factory I have multiple video inputs that are composite. I assume I can just tap one of the existing inputs but does that mean I just simply have to select that input to use this device to see my galaxy tab 10.1? Also how do I find out without ripping apart the dash to see what type of touchscreen cable I have for the switcher? I have the factory 430n head unit. And because I am using my tablet instead of my phone I assume my Bluetooth pairing will remain working for the factory hands free? Thanks and cool product!

---

For the video you just need to connect it to any of your AUX A/V inputs (some devices might require addition video converter). Most vehicles that I have seen have the type "A" 4-wire interface. I have seen some Acura's with type "B". If you car has a different type of 4-wire connector (rare) we will be happy to make an custom adaptor for you. If you use your tablet or your Android phone, you wont lose any factory bluetooth car-kit intergration. You phone will be able to pair up with Android touch module and your factory bluetooth carkit simultaneously with no problems.

Quote:

---

Originally Posted by kboxvegas

I am ready to jump on two of these.

Are there any know issues with using my Sprint EVO 3D like there are with the EVO 4? Also are there any known issues with a using the touchscreen in a JVC KW-AVX800, which I have been JVC uses a 4wire panel?

---

We sent you a reply to this, not sure if you got it. Looks like the Sprint EVO 3D is compatible, we just need to confirm 100% with an actual handset. Your JVC headunit should be fine to use.

Quote:

---

Originally Posted by davedave1234

Thanks for the reply, I am not going to be using A2DP since I have to physicaly connect the MHL (galaxy S2 Skyrocket) anyway I am just going to strip the audio out and plug into the AUX in on the car. Any update on the shipping? Does it still look like 1 1/2 weeks or so?

---

Im on skyrocket as well, just be careful test it with your screen. sGS2 kills audio on headphones if using mhl cable, unless edid on the screen tells it no audio.
Ive tested this on different monitors, and some it will push digital audio over hdmi, and some wont. Luckly im going into a dvi port on my screen, and audio is preserved on 3.5mm as im also using an aux in.

Quote:

---

Originally Posted by ptrout

Im on skyrocket as well, just be careful test it with your screen. sGS2 kills audio on headphones if using mhl cable, unless edid on the screen tells it no audio.
Ive tested this on different monitors, and some it will push digital audio over hdmi, and some wont. Luckly im going into a dvi port on my screen, and audio is preserved on 3.5mm as im also using an aux in.

---

Thanks for the heads up, it may come in handy in the future, but I hope it does kill the 3.5 out as I dont want to have to plug in 2 items every time I get in the car. But the monitor I got has a DAC built in so it will give me the audio out through the monitor in analog format. I havnt tested because there is a little plug that needs to be made for it but others say it works fine. just the monitor I bought had some issue durring shipping and I am waiting on the replacement part before I start making cables and what not.

Quote:

---

Originally Posted by davedave1234

Thanks for the heads up, it may come in handy in the future, but I hope it does kill the 3.5 out as I dont want to have to plug in 2 items every time I get in the car. But the monitor I got has a DAC built in so it will give me the audio out through the monitor in analog format. I havnt tested because there is a little plug that needs to be made for it but others say it works fine. just the monitor I bought had some issue durring shipping and I am waiting on the replacement part before I start making cables and what not.

---

What monitor did you get that has a built in DAC?

Quote:

---

Originally Posted by nettech_gt

What monitor did you get that has a built in DAC?

---

http://www.mp3car.com/lcd-display/14...-36-s-h-3.html

probably that one, 8838.com says it pass hdmi audio out as 2ch analog, haven't heard it being confirmed, but that hell of a deal, since even cheapest HDMI DAC are ~$100. I might jump on it myself

Quote:

---

Originally Posted by ptrout

http://www.mp3car.com/lcd-display/14...-36-s-h-3.html

probably that one, 8838.com says it pass hdmi audio out as 2ch analog, haven't heard it being confirmed, but that hell of a deal, since even cheapest HDMI DAC are ~$100. I might jump on it myself

---

Thats the one, acording to the guy selling them there is a header onboard that outpus analog audio. I have the board but it had a problem durring shipping (used board) so I havnet tested yet. I will let you guys know as soon as I get a chance to try it.