Page 1 of 7 1234567 LastLast
Results 1 to 10 of 62

Thread: iPad 2 install in Silverado!

  1. #1
    Low Bitrate torres1708's Avatar
    Join Date
    Feb 2009
    Location
    Norman, OK
    Posts
    79

    iPad 2 install in Silverado!

    So, I plan on installing an iPad 2 in my truck and remove the iPad 1 setup. I will post the progress. Below is a video of the old setup. I have decided to move the iPad down and relocate the A/C controls to the center console. My goal is to try to keep the body lines and because of this I had to cut the air vent to be able to move the iPad to the right. I also plan on using a linear actuator to motorize it as I did in the previous install. I will also fiberglass the center console to house the deck...

    Here's the link to current setup:


    The idea before and after:



    AS A RESULT, THE OLD SETUP IS UP FOR SALE IF ANYONE IS INTERESTED. IT CAN HOUSE THE IPAD 1 AND IPAD 2


    Here's a pic of the modification to the air vent:


    The Bezel:



    Final Product:
    Last edited by torres1708; 04-26-2011 at 09:17 AM.

  2. #2
    Constant Bitrate
    Join Date
    Jan 2002
    Location
    Philadelphia
    Posts
    156
    So how are you connecting the ipad2 to the rest of your system? I am assuming either the audison bitone or just another head unit?

    How are you handling hands free calling if you are NOT using a head unit? I am currently planning my install of an ipad2 in my 2003 Camry.

    That dash looks really nice by the way. Looking forward to seeing the final install.

  3. #3
    Low Bitrate torres1708's Avatar
    Join Date
    Feb 2009
    Location
    Norman, OK
    Posts
    79
    It connects to the iPad dock connector located on the left of the frame and from there, I take the audio out and charging. The audio out goes to the Kenwood Headunit's aux in. The Kenwood has USB input for when I don't have the iPad and has a mic that I drilled onto the dash for handsfree calling.

    I finished up the fiberglassing on the new setup and doing the clean up and touch-ups before paint. It's looking really good.

  4. #4
    Constant Bitrate
    Join Date
    Jan 2002
    Location
    Philadelphia
    Posts
    156
    Cool.

    I see some people out there not using a head unit and I guess they don't do hands free calling.

    So since you had this in before, can you recommend any apps that are good for in car use? I currently have the Oxygen Audio O'Car in my car. It replaces a head unit with a iphone mount.

    Motion X is my GPS of choice. tunein radio for internet radio, Radar Active, and of course Pandora.

    Make sure to post picks when you are done.

  5. #5
    Low Bitrate torres1708's Avatar
    Join Date
    Feb 2009
    Location
    Norman, OK
    Posts
    79
    You definitely want to get LeechTunes for music... I don't even use the iPod app anymore because of LeechTunes' intuitive design and gestures to control your music. I can browse my music without even looking at the iPad. I'm waiting for the iPad 2 jailbreak so I can add the additional gestures and not have to use the home button, and enable voice control.

    Also, I think using a headunit is a must, because this way you have a backup if you don't have the ipad on your car and you will get radio, BT, handsfree calling, USB for music, and volume.

  6. #6
    Low Bitrate torres1708's Avatar
    Join Date
    Feb 2009
    Location
    Norman, OK
    Posts
    79
    Progress pics:


    Making sure the fit is perfect.


    Finishing the fiberglassing.


    Adding plastic Epoxy. I plan on using zero bondo. This epoxy resembles the plastic of the dash and will flex appropriately with changing tempertures and not crack with time like fiberglass and Bondo.

  7. #7
    Constant Bitrate
    Join Date
    Jan 2002
    Location
    Philadelphia
    Posts
    156
    Looking good.

    And great call on LeechTunes. I had never heard of it. Installed it yesterday and love it.

  8. #8
    Low Bitrate torres1708's Avatar
    Join Date
    Feb 2009
    Location
    Norman, OK
    Posts
    79


  9. #9
    Newbie
    Join Date
    Apr 2011
    Posts
    4
    Torres, first off- sick install looks really good, i did some searching and my brain is hurting lol from so much info. I have 2- 4ch amps and 1-sub amp all powered by a pioneer 3200 double din. What i want to do is attempt to install an iPad as well, and i want to know how are you able to use your iPad and your kenwood deck? Can i do the same with my pioneer? And if so, how do i go about this? i came across this cable its used for tv but i curious as to if i can use this for a quick install
    http://www.bestbuy.com/site/Scosche+...&skuId=1118166

    Any information and advice would be greatly appreciated.

  10. #10
    Low Bitrate torres1708's Avatar
    Join Date
    Feb 2009
    Location
    Norman, OK
    Posts
    79
    Ready for paint:


    While the main dash piece is at the shop for paint, the next project is the A/C relocation..
    Before:


    The main idea is to place the Deck on the top and A/C controls on the bottom. This is the frame I will use to keep things straight when applying the fiberglass:


    ---------- Post added at 02:41 PM ---------- Previous post was at 02:37 PM ----------

    Quote Originally Posted by mcd8070 View Post
    Torres, first off- sick install looks really good, i did some searching and my brain is hurting lol from so much info. I have 2- 4ch amps and 1-sub amp all powered by a pioneer 3200 double din. What i want to do is attempt to install an iPad as well, and i want to know how are you able to use your iPad and your kenwood deck? Can i do the same with my pioneer? And if so, how do i go about this? i came across this cable its used for tv but i curious as to if i can use this for a quick install
    http://www.bestbuy.com/site/Scosche+...&skuId=1118166

    Any information and advice would be greatly appreciated.
    If your Pioneer deck has an Aux input then you should be able to hook it up like I did. As you can see from the build, I used the iPad dock and used the audio out from the dock to the aux in on the deck. You can use the cable on your link, but you definitely want to get one with charging... Another thing, that cable has video out, so you won't be able to see videos on your iPad unless you jailbreak it.

Page 1 of 7 1234567 LastLast

Similar Threads

  1. Replies: 10
    Last Post: 02-01-2011, 07:27 AM
  2. iPad installed in my Chevy Silverado
    By torres1708 in forum Apple iPad
    Replies: 32
    Last Post: 09-02-2010, 11:25 PM
  3. 99 Chevy Silverado install
    By baggyp in forum Show off your project
    Replies: 4
    Last Post: 04-07-2010, 01:38 PM
  4. 04 silverado install ideas
    By Molaw in forum Fabrication
    Replies: 2
    Last Post: 03-02-2008, 04:50 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •