View RSS Feed

optikalefx

New Product: p5USB Hub

Rate this Entry
116 Comments
by
optikalefx
, 07-13-2009 at 10:31 AM (2349 Views)


Goce from mp3Car shows the advantages to the p5USB hub
http://store.mp3car.com/DC_Powered_4..._p/adt-015.htm

Features include:
Take voltage from 7-32 volts
guaranteed 500 mA to each port.
Each port has it's own self resetting fuse
Reverse polarity protection
startup and shutdow controller
Delayed startup and shutdown (5 min and 25 min)

http://store.mp3car.com/DC_Powered_4..._p/adt-015.htm

Submit "New Product: p5USB Hub" to Digg Submit "New Product: p5USB Hub" to del.icio.us Submit "New Product: p5USB Hub" to StumbleUpon Submit "New Product: p5USB Hub" to Google

Updated 09-17-2009 at 03:55 PM by optikalefx

Categories
Products and Technology , How To Videos

Comments

Leave Comment Leave Comment
View Thread

Last 3 Posts

Quote Originally Posted by Fiberoptic View Post
You must have the p5usb plugged into a host device before it gets power. Also please see the technical documentation on the first three links of the product description here if you haven't already.
http://store.mp3car.com/DC_Powered_4..._p/adt-015.htm
THanks! THat advice made me double check my USB cable and it looks like I had a bad one. Replaced it and all is good.
Quote Originally Posted by tech180 View Post
I have an issue with my p5USB not even turning on. There i 12v going to bolth the hot wires and its grounded good, tested with the multimeter and power is getting to the mole connector fine. I turn it on and get nothing, no lights or anything. Its a brand new unit, never used.

Any idea?
You must have the p5usb plugged into a host device before it gets power. Also please see the technical documentation on the first three links of the product description here if you haven't already.
http://store.mp3car.com/DC_Powered_4..._p/adt-015.htm
I have an issue with my p5USB not even turning on. There i 12v going to bolth the hot wires and its grounded good, tested with the multimeter and power is getting to the mole connector fine. I turn it on and get nothing, no lights or anything. Its a brand new unit, never used.

Any idea?