New Intel Motherboard with SSD
by , 07-22-2009 at 10:05 AM (2603 Views)
Rob Wray from mp3Car takes a closer look at Intel's D945gsejt motherboard and their SSD z-u130 2 GB module .
The unique fact here is that they made room on motherboard to fit this 2gb module into the USB header, so you can essentially have a very fast boot up time if your OS is installed on that chip without taking up barely 2 inches of the board.
Comments
Leave Comment
View Thread
Last 3 Posts
So what is the standard workaround to boot XP from USB? Is it exactly the same procedure as for this USB flash device?
cheers
nevermind... =) read the manual and here are the dimensions
4.6" x 3.25" x 1.75" (L x W x H) or 117mm x 83mm x 45mm.
which will fit in my case... thanks!instead of using the p2140 (as I want to mount the PS within my 2DIN scion stock radio case), what other Power supply do you suggest using? I took a look at all the OPUS and DSA-X and M2 M3 DC-DC power supplies on sale in the store but cant find any that support just the 4 PIN connector on this board?
thanks in advance (first time poster)
cheers
nevermind... =) read the manual and here are the dimensions4.6" x 3.25" x 1.75" (L x W x H) or 117mm x 83mm x 45mm.
which will fit in my case... thanks!instead of using the p2140 (as I want to mount the PS within my 2DIN scion stock radio case), what other Power supply do you suggest using? I took a look at all the OPUS and DSA-X and M2 M3 DC-DC power supplies on sale in the store but cant find any that support just the 4 PIN connector on this board?
thanks in advance (first time poster)









Email Blog Entry
