View RSS Feed

Fiberoptic

Lilliput 7" Canadian Coast Guard Install

Rate this Entry
by , 08-14-2009 at 11:37 AM (1736 Views)
Looking to equip your yacht or sailing vessel with a low cost display option? Maybe you want a cost effective solution and don't want to overpay just for the marine stamp on the prodct. You aren't alone. Mp3car outfitted the Canadian Coast Guard vessels with the $239 Lilliput 629 monitors earlier in the year and we thought we would share some photos. These monitors aren't specifically made for marine use, but they do the job in an enclosed wheel house.

Submit "Lilliput 7" Canadian Coast Guard Install" to Digg Submit "Lilliput 7" Canadian Coast Guard Install" to del.icio.us Submit "Lilliput 7" Canadian Coast Guard Install" to StumbleUpon Submit "Lilliput 7" Canadian Coast Guard Install" to Google

Updated 11-12-2009 at 04:23 PM by Heather

Tags: None Add / Edit Tags
Categories
mp3Car News

Comments

Leave Comment Leave Comment
View Thread

Last 3 Posts

Quote Originally Posted by yellow99 View Post
Well i also tried to install an Club 3D Radeon HD 2400 Pro... but when i started the computer\motherboard i didnt get any video on any of the ports (bought PCI card as well as the onboard video ports)

When i took out the PCI card everything seems to be working fine again...
OH WOW, so this board has alot of limitations!
Quote Originally Posted by HiJackZX1 View Post
I guess its safe to say that the INTEL is best for people that dont need multi monitor applications, unless they do not mind adding a graphics card.
Well i also tried to install an Club 3D Radeon HD 2400 Pro... but when i started the computer\motherboard i didnt get any video on any of the ports (bought PCI card as well as the onboard video ports)

When i took out the PCI card everything seems to be working fine again...
Quote Originally Posted by yellow99 View Post
Ok Ive tested it. HiJackZX1 is right

http://cgi.ebay.nl/ws/eBayISAPI.dll?...EOIBSA:NL:1123 doesn't work on the D945GSEJT (just tested it myself)

At least i can say that for a few euro's i know for sure

I am not gonna buy a adapter/converter from hdfury.com... it costs more than the motherboard itself!
You are right, these converters are expensive. The HD FURY is actually the cheapest I could find at the time. I think I bought mine for $115.00 off ebay. I bought this for my expensive KINO though, which ran me about $300.00 with all components added. I didnt have room for a second graphics card, so I had to use the DVI-D port. I guess its safe to say that the INTEL is best for people that dont need multi monitor applications, unless they do not mind adding a graphics card.

Quote Originally Posted by trader007 View Post
i assuming the biggest draw to this setup is size? theyre talking about the 1a power draw, which is nice, but for 2a at idle and 6a full load you can use a late model mATX setup with a 35w processor- its not that much larger, not that much more power draw and a hell of a lot faster.
I do not think these boards will ever go over 2amps if a Powered External hub is used. On my proposed setup, the keyboard and mouse are powered by the main system, via a KVM switch. So its basically just a 1 usb port, HDD, and thats about it. So I expect about 1.5 - 2 amp draw or less. This board is very very good if you plan out how you power the USB devices.