View RSS Feed

Fiberoptic

the New Fanless Morex T-1610 Case Only for D945GSEJT

Rate this Entry
by , 08-03-2009 at 03:57 PM (1833 Views)
We have added the New Fanless Morex T-1610 Case Only for D945GSEJT to our store. These cases will begin shipping on Friday August 7, 2009.
Fanless Morex T-1610 Mini-ITX Case - White
Model No.: T1610
Dimensions(mm): 38mm (H) x 178mm (W) x 178mm(D)
Suitable M/B: Intel D945GSEJT M/B
Main Board Size(mm): Mini-ITX Form Factor (170 x 170)
Front Port: N/A
Device Support::
CD / DVD Device: N/A
HDD Device: (1) 2.5" mounting bracket
PCI Slots: N/A
System Fan: N/A (fanless)
Application: Vehicle or Car-PC with Carnetix P2140, Thin Client, Transportation, Networking, All-In-One
Power Supply: (not included in above price)
Optonal Carnetix P2140 (for vehicle/Marine Use) (7.5-34 VDC input) (ignition integrated startup/shut down timer*)
Optional Accessory: AC Adapter (12V/5A)

*ignition integrated startup/shut down timing requires XC3 Cable) and 3.5mm to MB header assembly (not included)

Submit "the New Fanless Morex T-1610 Case Only for D945GSEJT" to Digg Submit "the New Fanless Morex T-1610 Case Only for D945GSEJT" to del.icio.us Submit "the New Fanless Morex T-1610 Case Only for D945GSEJT" to StumbleUpon Submit "the New Fanless Morex T-1610 Case Only for D945GSEJT" to Google

Tags: None Add / Edit Tags
Categories
Uncategorized

Comments

Leave Comment Leave Comment
View Thread

Last 3 Posts

Quote Originally Posted by yellow99 View Post
Well i also tried to install an Club 3D Radeon HD 2400 Pro... but when i started the computer\motherboard i didnt get any video on any of the ports (bought PCI card as well as the onboard video ports)

When i took out the PCI card everything seems to be working fine again...
OH WOW, so this board has alot of limitations!
Quote Originally Posted by HiJackZX1 View Post
I guess its safe to say that the INTEL is best for people that dont need multi monitor applications, unless they do not mind adding a graphics card.
Well i also tried to install an Club 3D Radeon HD 2400 Pro... but when i started the computer\motherboard i didnt get any video on any of the ports (bought PCI card as well as the onboard video ports)

When i took out the PCI card everything seems to be working fine again...
Quote Originally Posted by yellow99 View Post
Ok Ive tested it. HiJackZX1 is right

http://cgi.ebay.nl/ws/eBayISAPI.dll?...EOIBSA:NL:1123 doesn't work on the D945GSEJT (just tested it myself)

At least i can say that for a few euro's i know for sure

I am not gonna buy a adapter/converter from hdfury.com... it costs more than the motherboard itself!
You are right, these converters are expensive. The HD FURY is actually the cheapest I could find at the time. I think I bought mine for $115.00 off ebay. I bought this for my expensive KINO though, which ran me about $300.00 with all components added. I didnt have room for a second graphics card, so I had to use the DVI-D port. I guess its safe to say that the INTEL is best for people that dont need multi monitor applications, unless they do not mind adding a graphics card.

Quote Originally Posted by trader007 View Post
i assuming the biggest draw to this setup is size? theyre talking about the 1a power draw, which is nice, but for 2a at idle and 6a full load you can use a late model mATX setup with a 35w processor- its not that much larger, not that much more power draw and a hell of a lot faster.
I do not think these boards will ever go over 2amps if a Powered External hub is used. On my proposed setup, the keyboard and mouse are powered by the main system, via a KVM switch. So its basically just a 1 usb port, HDD, and thats about it. So I expect about 1.5 - 2 amp draw or less. This board is very very good if you plan out how you power the USB devices.