View RSS Feed

optikalefx

USB Powered Touch Monitor by MIMO, 720-S

Rate this Entry
by , 03-03-2010 at 04:45 PM (9798 Views)

Embed this video

MIMO uses DisplayLink technology to make the 720-S, a 7 inch monitor that has 3 uses for the single USB cable. It gets power over USB, video over USB, and touch input over USB. There are many possible uses for this kind of monitor where any program that has multiple windows, could be spread out to this extra monitor.

Submit "USB Powered Touch Monitor by MIMO, 720-S" to Digg Submit "USB Powered Touch Monitor by MIMO, 720-S" to del.icio.us Submit "USB Powered Touch Monitor by MIMO, 720-S" to StumbleUpon Submit "USB Powered Touch Monitor by MIMO, 720-S" to Google

Updated 03-04-2010 at 09:42 AM by optikalefx

Categories
Products and Technology

Comments

Leave Comment Leave Comment
View Thread

Last 3 Posts

Quote Originally Posted by kev000 View Post
I have some c# code I wrote over the summer that talks with NetworkManager to turn on/off the gsm connection. If that interests you I can share. You may not want to run mono on your plug though. The crappy part will be setting up the initial connection via commandline. There is a cli interface for network manager now, so that shouldn't be too difficult. You have to do the same for proximity to work with wifi connections to APs as well...
I would have been interested in August haha. Right now my python code is working great and what I've learned about the 3g connection is don't f*** with it. I've screwed that up a few too many times. Thanks for the offer though.
Great video.


Quote Originally Posted by PaulF View Post
Nice video. I hadn't seen the smaller version of the plug yet. Cool.

I actually do have a 3G connection on my plug. It's a verizon USB stick. I got it working with wvdial after some serious screwing. Works great. Only issue is that verizon drops an idle connection after 5 minutes, so I just wrote a script to have it ping google every 4 minutes. I also wrote another to make sure the connection restarts if it is lost.

I setup a wifi access point in my car by hooking a linksys "router" into the sheeva's ethernet port and turning off the DHCP and routing servers on the router. Then I setup the plug as a DHCP server, DNS server, and a gateway.
I have some c# code I wrote over the summer that talks with NetworkManager to turn on/off the gsm connection. If that interests you I can share. You may not want to run mono on your plug though. The crappy part will be setting up the initial connection via commandline. There is a cli interface for network manager now, so that shouldn't be too difficult. You have to do the same for proximity to work with wifi connections to APs as well...
And it was all because mp3car mailed me a plug!

I don't look too awful in that video! I'm surprised and pleased!

Gary (-;