NEW* mp3Car Sunlight Readable Monitor HDMI DVI VGA
by , 09-29-2010 at 01:06 PM (6442 Views)
Struggled with hard to read displays long enough or do you own a convertible? If so, this is for you!
This display has been optically enhanced to provide better viewing in the automotive environment including:
* Tranflective enhancement – ensures readability even in direct sunlight
* Anti-glare technology - provides a wide range of view ability over a wide range of lighting conditions
NEW* This monitor is now based off the Lilliput 669 but has been painstakingly enhanced to ensure maximum viewability in all lighting conditions. Featuring HDMI, DVI, and VGA inputs, this monitor includes all the factory Lilliput accessories.
Comments
Leave Comment
View Thread
Last 3 Posts
It's 800x600 which isn't HD yet they claim it is. Hate it when sellers do that.
The 10.4" I had in my Yukon is much better than that screen and it was "only" $580 LOL
http://www.avionicslcd.com/10.4_LCD/...cs_display.htmI found that lillput promotes thei rnew 7 inch tablet display for car use
Comply with IP65 Standard!
LCD Panel PC for Industrial Application
All hardware and software can be adjusted to your requirements.

7" WinCE PC with touch function
A sheet of Aluminum as radiator
Memory with SD Card
USB interface ×2
RS232 interface × 4
Earphone output
Multi-language OSD
Multi-media Player
Microsoft Office Viewer
WLAN: Wi-Fi 802.1.1b (external) (optional)
GPS (optional
Parameters
7" Wide TFT LCD
Touch Function: 4-wire resistive panel
Resolution: 800×480 (1,152,000) pixels
Aspect ratio: 16:9
OS: Windows CE 5.0
CPU: Samsung S3C2416, 400MHZ
Memory: 2GB Flash ROM + 128 MB DDR2
Data Storage: SD card/USB Flash Memory
Expansion Slot: SD card, support SD/IO (Up to 4GB)
Transfers Surface: USB 1.1 and Mini USB 2.0
Speaker: 1W
Working Temperature: -10-65ºC
Storage Temperature: -25-80ºC
Power Supply: DC 12V
Dimension (mm): 188L×114W×35D
Weight: 615g
Accessories:
13-pin to 4×RS232 and Power cable 1 Piece
USB Cable 1 Piece
DC 12V Home Power 1 Piece
Touch pen 1 Piece
Driver Disk 1 Piece
Operation Manual 1 CopyThanks. Big mistake I did was to buy expensive AG shields for my tablet and iPad. I think they look better without them, the AG really diffuses the sun light all over the screen...does not look good.
I'm looking everywhere for a good screen.
I guy I know is into shooting HD movies with his DSLR commercially. He was looking into a well built outdoor screen, rugged. He is looking into Marshalls, but not the transflective ones at first - those can be very expensive. He bought a box where he'll put the laptop in protected from the sun just to make sure the filming was good, so that is not essential. It's just for the focus.
SO besides $2K Marshalls, he is considering something like this:
A Transflective Marshall can go easily 2K even used, but this one looks good to me:
http://cgi.ebay.com/ws/eBayISAPI.dll...ht_1270wt_1139
The 10.4" I had in my Yukon is much better than that screen and it was "only" $580 LOL
http://www.avionicslcd.com/10.4_LCD/...cs_display.htmI found that lillput promotes thei rnew 7 inch tablet display for car use
Comply with IP65 Standard!
LCD Panel PC for Industrial Application
All hardware and software can be adjusted to your requirements.

7" WinCE PC with touch function
A sheet of Aluminum as radiator
Memory with SD Card
USB interface ×2
RS232 interface × 4
Earphone output
Multi-language OSD
Multi-media Player
Microsoft Office Viewer
WLAN: Wi-Fi 802.1.1b (external) (optional)
GPS (optional
Parameters
7" Wide TFT LCD
Touch Function: 4-wire resistive panel
Resolution: 800×480 (1,152,000) pixels
Aspect ratio: 16:9
OS: Windows CE 5.0
CPU: Samsung S3C2416, 400MHZ
Memory: 2GB Flash ROM + 128 MB DDR2
Data Storage: SD card/USB Flash Memory
Expansion Slot: SD card, support SD/IO (Up to 4GB)
Transfers Surface: USB 1.1 and Mini USB 2.0
Speaker: 1W
Working Temperature: -10-65ºC
Storage Temperature: -25-80ºC
Power Supply: DC 12V
Dimension (mm): 188L×114W×35D
Weight: 615g
Accessories:
13-pin to 4×RS232 and Power cable 1 Piece
USB Cable 1 Piece
DC 12V Home Power 1 Piece
Touch pen 1 Piece
Driver Disk 1 Piece
Operation Manual 1 CopyThanks. Big mistake I did was to buy expensive AG shields for my tablet and iPad. I think they look better without them, the AG really diffuses the sun light all over the screen...does not look good.
I'm looking everywhere for a good screen.
I guy I know is into shooting HD movies with his DSLR commercially. He was looking into a well built outdoor screen, rugged. He is looking into Marshalls, but not the transflective ones at first - those can be very expensive. He bought a box where he'll put the laptop in protected from the sun just to make sure the filming was good, so that is not essential. It's just for the focus.
SO besides $2K Marshalls, he is considering something like this:
A Transflective Marshall can go easily 2K even used, but this one looks good to me:
http://cgi.ebay.com/ws/eBayISAPI.dll...ht_1270wt_1139










Email Blog Entry
