View RSS Feed

How To Videos

  1. Car Computer Install: Wiring The Amplifier Overview

    by , 12-14-2011 at 03:15 PM

    Embed this video


    Sean Clark, from mp3Car, shows us how to connect the amplifier in your vehicle, an essential component to any car computer install. The 12 volt positive power cable is wired directly to the positive terminal on the battery, with a fuse in line as close to the battery as possible. The negative wire is also run directly to the battery to prevent noise from being introduced into the system. The ACC wire and the speaker wires are connected to the factory wiring harness using an adapter made specifically for this vehicle purchased on the web.
  2. Plan and test your in-vehicle computer installation on the bench

    by , 10-15-2009 at 10:15 AM
    Testing is one of the most important steps in putting a computer in your vehicle or car and is often skipped. We highly recommend testing your system on the bench for a day or two before you put the device in your car. We previously did a video on how to build your own car computer. This video will give you some insights into this next step.

    Updated 10-15-2009 at 01:01 PM by Heather

    Categories
    How To Videos
  3. New Product: p5USB Hub

    by , 07-13-2009 at 09:31 AM


    Goce from mp3Car shows the advantages to the p5USB hub
    http://store.mp3car.com/DC_Powered_4..._p/adt-015.htm

    Features include:
    Take voltage from 7-32 volts
    guaranteed 500 mA to each port.
    Each port has it's own self resetting fuse
    Reverse polarity protection
    startup and shutdow controller
    Delayed startup and shutdown (5 min and 25 min)

    http://store.mp3car.com/DC_Powered_4..._p/adt-015.htm

    Updated 09-17-2009 at 02:55 PM by optikalefx

    Categories
    Products and Technology , How To Videos
  4. Information Overload: CNX P2140 ACPI over USB to control your laptop Hibernate part 2

    by , 07-02-2009 at 02:07 PM


    Goce from mp3Car takes us through the steps to use your p2140 to hibernate and wake up from hibernation of your laptop.

    Materials needed:
    -Laptop
    -CNX P2140
    store.mp3car.com/Carnetix_CNX_P2140_185W_DC_DC_Regulator_p/pwr-026.htm
    -PSUmoni
    carnetix.com/support.html
    -Vehicle installation

    Make sure you watch our last video to learn how to wire the p2140 to power your laptop!

    Updated 09-17-2009 at 02:57 PM by optikalefx

    Categories
    Products and Technology , How To Videos
  5. CNX P2140 ACPI over USB to control

    by , 06-23-2009 at 04:26 PM


    Goce from mp3Car takes us through the steps to use your p2140 to hibernate and wake up from hibernation of your laptop.

    Materials needed:
    -Laptop
    -CNX P2140
    store.mp3car.com/Carnetix_CNX_P2140_185W_DC_DC_Regulator_p/pwr-026.htm
    -PSUmoni
    carnetix.com/support.html
    -Vehicle installation

    Make sure you watch our last video to learn how to wire the p2140 to power your laptop!

    Part 2 coming soon.

    Updated 09-17-2009 at 02:58 PM by optikalefx

    Categories
    Products and Technology , How To Videos
Page 1 of 3 123 LastLast