Thread: Need help, white noise after hibernation and too loud

Nothing?

I installed the latest BB software, 1.3.1.4. No change in the resume behavior.

Had another look at setting the audio level and was unsuccessful. There doesn't seem to be any setting in the hardware devices.
Looking at every volume control for every device didn't do it either. Nothing adjusts the radio volume except the main volume control.

I'm using eLite Wings as a skin and last night, if the hdradio was enabled, RR would quit as soon as I heard the click from the BB. I didn't try it with CarWings, got too late.

Anyone have experience with this thing in XP?
Thanks,
davidk

When looking at the volume controls in XP...when you select USB audio codec, there are objects when you select playback but there are no devices when you select recording. The recording button is there as if there should be objects to select but nothing shows up.

The same white noise stuff is happening regardless of RR or BB software. If it's coming from the radio it's not being muted when switching to music in RR.

Is this thing on?
davidk

Man, you're impatient.

No, not impatient...not happy that it's advertised as working with XP and it doesn't.
I'm not new to computers and this thing has tested my patience.

I'm just a little frustrated with this. It's yet another thing with this carputer that almost works. I'm under a bit of a deadline to get this working too. The wife doesn't want our 3 month old car taken apart for so long.

I made a vid of what's going on.
[media]http://www.youtube.com/watch?v=prWfF6YCs9U[/media]
This happens with the radio enabled in RR or with the BB software. Tonight, with the radio enabled in RR, it would start and when the radio module clicked on RR would terminate. It eventually stayed running after about 5 tries.

I do appreciate the help I've received on this forum. Without it I'd not be as far as I am with my project.
My hope is that this module can be made to work with XP.
Thanks,
davidk

As for the volume, where does this get set? HDRadio---> HDRadioEventHWPoweredOn.Setting Volume=70
This is from a debug trace.
Is it the USB Audio level mentioned in the instructions? Would this setting be able to be changed? Would changing this accomplish the same thing?

thx
davidk

1st that isnt white noise
to fix it, you will need to send me the usb interface box

now... audio level in RideRunner is controlled by a setting
lower the level ... 65 is a good number to try

in rr.ini

HDVolume=65


right from the documentation that nobody reads, and is hard to find stuff in anyway


hdvolume=0-90
Sets default HD radio volume. Default is 75, range is from 0 to 90.

in the boomzbox software:

1 make sure your running the latest
which is on my skydrive

http://cid-ed9324dabf9c9cb3.office.l...HD%20Setup.zip

and hit ctrl-v
and tweak the volume

alot going on here...

if u do get white noise it sounds like this
http://simplynoise.com/

which is like a tuned freq, with no signal on it