PXA-H701 + NVE-N099p Navigation sound help
I am new to this forum, and this is my first post, so Hello!
I've read this thread extensively and it has some fantastic information in it, and nearly everything I need to know, except this:
I have an IVA-D310RB, a CHA-S624, a PXA-H701, an MRV-F545 and MRD-M1005, an SWX-1243D and a pair of SPX-177R's in the front and rear, and now a NVE-N099P Navigation unit (self installed in a Seat Ibiza...:lol:).
The RB is connected to the PXA optically and via AI-Net, as is the CHA-S624 changer. I've connected the NVE-N099P to the brain of the IVA using the 13pin RGB cable, connected the speed pulse (haven't done reverse wire yet), the ground and both power wires, and the thing works wonderfully - except.... I get no navigation sound through the speakers when an instruction occurs if I am listening to anything from the headunit, or the CD changer. The sound mutes a little, as if an instruction should be heard, but nothing comes out and then the music volume returns to normal.
If I select the navigation unit as the source itself from the IVA-D310R, I can hear the instructions clearly.
What have I missed??!
I read earlier in this post that the PXA-H701 has an input for navigation sound interrupt, but which wire on the NVE-N099P should I connect to this interrupt if I need to? Or is it just some settings that I am missing? It's just not clear! (well, not to my weak brain anyway).
I've set the navigation Mix to 'on' in the IVA-D310RB setup, and turned the Navigation mix volume to 15 in the Audio settings page, but it won't play ball with me :(
If anyone can help with any suggestions I'd be most obliged. When I finally get it working, I was also going to beg for some help in tuning the whole thing up too - there are more settings than I can shake a stick at... :yum:
Thanks in advance,