CarPC to Chrysler Factory Infinity Amp
I have a Chrysler 300M Special that I want to put a CarPC into. I want to take out the HU but use the rest of the system. For those not familiar with the Stereo in these cars, it suppose to have nine, yes, nine speakers. 2 on the back shelf, 2 in each rear doors, 4 in the front doors and one in the center of the dash. Anyway what I would like to know is if I can wire my speakers up to 3.5mm stereo plugs and hook them to my Zotac ITX77 C-E MB. I believe its 7.1 sound. SOOO basically it would be this way. Remove HU, connect 3.5 plugs to wiring normally going to HU and then to the stock amp. No, yes......anyone.
The Infinity ll System includes:
² A 360 watt power amplifier with nine output
channels, one for each speaker location.
² One 2.5 inch, round single-cone, spatial imaging
speaker in the center of the instrument panel.
² Two 2.5 inch round, single cone, spatial imaging
speakers in the lower corners of the front door windows.
² Two 6.5 inch, round single-cone speakers in the
² Two 6 x 9-inch, single-cone speakers mounted in
the rear shelf panel.
² Two 2.5 inch, round speakers mounted in the