LinkBack URL
About LinkBacks
Reply With QuoteYou just need to extend the connections from the face to the base. Most people use CAT5 wire.
Rich
Relocating just the faceplate to an aftermarket HU
Ive seen a few people on here that have relocated just the faceplate to their aftermarket HU and then hid the actual HU somewhere out of sight.. ive emailed them but have not recieved any replies,, im sure there are more of you out there.. how would i go about doing this??? any info would be great,, thanks
You just need to extend the connections from the face to the base. Most people use CAT5 wire.
Rich
how face can you extent the wires. is it possible 9 feet from the floor to the head console.?
You can probably extend them pretty darn far, there's probably no high-bandwidth traffic between the HU and the faceplate. The distance is usually just a problem when you're talking about strobing the signal 50K times a second or something to transmit data. A faceplate probably 'talks' to the HU through simple, slow commands.
Chrysler 300 - Fabricating
http://hallert.net/
here is the link to the rest of the thread
Remote faceplate! turned out really nice, check it out
Posting Permissions
Bookmarks