Car Audio (and computer audio) Guru's I need your help (My Mp3Car Audio is too quiet)
Ok, I have asked about this in the past, but now I have the extra $$ to go ahead and do it.. I am seeking the best (ie cheapest) route.
Here is what I have
Jeep Grand Cherokee with Upgraded Infinity System
(Radio unit with external amplifier and six Infinity 4-ohm speakers. Amp is an Infinity 180w amp, with a factory harness)
I have replaced the stock radio with a 7" touchscreen connected to a computer. (a la Mp3Car style) and I used a aftermarket "factory" harness to connect my mini-plug computer output into my amplifier. (Harness connects to what used to connect to the radio, and then I have soldered wires to it)
Now, here is what I want to do. I want my stereo back to the same loudness that I had before. Nothing more, nothing less. I just want my stereo to sound good, doesnt have to be loud (it was loud enough before)
The problem is I am feeding the amp line-level power (from the computer) into an amp that is wanting a high-input (from the stock stereo)
As I said, I have asked about this before, and someone mentioned that I get a line driver, but I am not exactly sure what I should get. Now remember I am going to have 2 fronts, and 2 rears. (so 4 channels)
On ebay I found some like this and some like this. I happen to have a $75 gift certificate to Crutchfield, and I noticed they have these.
What would you suggest I do here?