LinkBack URL
About LinkBacks
Reply With QuoteyesOriginally Posted by pirate_king00
I have the Sound Blaster Audigy2 NX sound card along with a JL Audio E6450 amp. Now my question is that I am going to Bridge channel 5 +6 for the subwoofer. Now seeing How I am not going to be using the center channel on the Audigy, what type of cable do I need to utilize both RCA cables going to Channel 5+6 (Bridged). Do I need the 3.5mm to RCA splitter, than a single RCA to DUal RCA? This just seems like way too many adapters. Please let me know if there is a specific cable that I need. I dont want the center channel freq. going to the sub.
Thanks
yes
Signature: [==||========] 20% complete
Thanks, I was hopeing that a cable existed to eliminate an extra cable.
Could use a stereo RCA -> 3.5mm cable and only use one channel (L or R)?
That would not allow me to meet my goal of running channel 5 & 6 bridged. You need 2 inputs into the amp.
Many time channels 5 and 6 (sub and center out) share the same output jack on the sound card use a stereo 3.5 mini jack. The tip is for one channel and the second ring is for the other. If these is how your sound card is this would be a good solution.
Posting Permissions
Bookmarks