XM / Sirius Worklog

**midiwall** · 01-04-2008, 02:08 PM

Originally Posted by Lithoss

It seems to be working fine now. Just incase anyone is in the same situation as me, all i did was kill XM (click on media in CF), go to settings, sat radio, and hit refresh channel list. i just let it sit right after that for 15 minutes and now its perfect. I also did the XM refresh on their site (http://www.xmradio.com/refresh/) about an hour earlier.

Ahh, one of those certainly made it happen for ya'!

I've also noticed an issue where the _first time_ that the module loads after the initial install/config, it will set itself to XMPCR. That can be an issue if you're using XMDirect.

Once you configure it the 2nd time though, it'll stay put.

as for terrestrial signal.... here in wichita ks i dont think there's much need for repeaters, except for maybe right downtown (where im not)...... maybe that explains it? thanks for info

Um yeup.. that would do it!

Yer Velcome!

**Lithoss** · 01-04-2008, 03:14 PM

seems like i spoke too soon, hibernation problems.... time to do more reading...

**Lithoss** · 01-04-2008, 03:23 PM

well ill throw this out there just incase whil i search:

when i come back from hibernation, it has all the channels up, but none of them refresh. the only way i can get it working again is close CF, open XMtest, kill XMtest, then open up CF and then it works fine again. is this a known problem?

its not the XMPCR problem, it stays XMdirect

EDIT:
in an attempt to get it somewhat working from hibernate, i installed up to 1.46.... still cant get it to do anything. is there an update that doesnt include sirius stuff?

this is what the XM log gives me:

Code:

52:12:48> startup
52:13:42> SatRadio_CF_Event_refreshText()
52:13:48> SatRadio_CF_Event_applicationLoaded()
52:16:87> CF_pluginShow()
52:16:87> startupRadio()
52:16:90> satPowerUp(0)
52:16:90> satPowerUp():  Opening COM1
52:17:90> satPowerUp(0)
52:17:90> satPowerUp():  Opening COM1
52:18:90> satPowerUp(0)
52:18:90> satPowerUp():  Opening COM1
52:19:90> satPowerUp(0)
52:19:92> satPowerUp():  Opening COM1
52:20:92> satPowerUp(0)
52:20:92> satPowerUp():  Opening COM1
52:21:92> satPowerUp(0)
52:21:92> satPowerUp():  Opening COM1
52:22:92> satPowerUp(0)
52:22:92> satPowerUp():  Opening COM1
52:22:93> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:22:93> CF_pluginSetVisImage()
52:22:93> satLoadList():  startupRadio() failed
52:23:01> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:23:17> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:23:32> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:23:48> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:23:64> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:23:79> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:23:95> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:24:10> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:24:26> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:24:42> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:24:57> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:24:73> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:24:89> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:25:04> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:25:20> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:25:35> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:25:51> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:25:67> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:25:82> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:25:98> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:26:14> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:26:29> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:26:45> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:26:60> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:26:76> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:26:92> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:27:07> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:27:23> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:27:39> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:27:54> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:27:70> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:27:73> CF_pluginPause()
52:27:73> CF_pluginPause(): Sending MUTE command
52:27:73> SaveSatCurrentAudio():  False
52:29:81> CF_pluginShow()
52:29:81> startupRadio()
52:29:84> satPowerUp(0)
52:29:84> satPowerUp():  Opening COM1
52:30:84> satPowerUp(0)
52:30:84> satPowerUp():  Opening COM1
52:31:84> satPowerUp(0)
52:31:84> satPowerUp():  Opening COM1
52:32:84> satPowerUp(0)
52:32:84> satPowerUp():  Opening COM1
52:33:84> satPowerUp(0)
52:33:84> satPowerUp():  Opening COM1
52:34:84> satPowerUp(0)
52:34:84> satPowerUp():  Opening COM1
52:35:84> satPowerUp(0)
52:35:84> satPowerUp():  Opening COM1
52:35:87> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:35:87> satLoadList():  startupRadio() failed
52:35:98> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:36:14> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:36:29> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:36:45> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:36:60> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:36:76> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:36:92> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:37:07> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:37:23> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:37:39> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:37:54> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:37:70> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:37:85> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:38:03> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:38:17> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:38:32> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:38:48> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:38:64> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:38:79> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:38:95> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:39:10> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:39:26> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:39:42> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:39:57> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:39:73> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:39:89> CF_pluginData(VISIMAGEPATH):  C:\Program Files\Flux Media\Centrafuse\Plugins\SatRadio\XMImages\generic.png
52:39:96> SatRadio_CF_Event_applicationClosing()
52:39:98> CF_pluginPause()
52:39:98> CF_pluginPause(): Sending MUTE command
52:39:98> SaveSatCurrentAudio():  False
52:40:00> CF_pluginClose()
52:40:00> satPowerDown()
52:40:00> CF_pluginClose():  Calling CF_setMixerMute(true)

**midiwall** · 01-04-2008, 09:21 PM

A couple of people have written me privately asking what versions of everything I'm running since I don't seem to have the troubles that a lot of folks here do.

Here ya' go!

CF 1.42.0.0
Satradio.dll 1.430 (11/17/2007)
XM is a XMDirect receiver, running on a real serial port as COM1, Not buffered, and logging is DISABLED (gives quicker touchscreen response in module)
Windows XP SP2, full install (nothing stripped)
CF running as an app - not as the shell

I LIVE on XM - it's my main source of entertainment in the car - and I have no real usability issues - not to the degree that I see people talking about here. i.e., resume from hibernate is fine; channel's refresh as appropriate; dropouts are only from it seemingly not using the terrestrial signal as applicable - but that "should be" automatic within the receiver, I don't think it's a CF issue.

A side thought to looking for problems is to check the NAV module. It defaults to owning COM1 and would interfere with an XM receiver on that port.

Hope that helps!

**Lithoss** · 01-04-2008, 09:58 PM

Originally Posted by midiwall

A couple of people have written me privately asking what versions of everything I'm running since I don't seem to have the troubles that a lot of folks here do.

Here ya' go!

CF 1.42.0.0
Satcomm.dll 1.430 (11/17/2007)
XM is a XMDirect receiver, running on a real serial port as COM1, Not buffered, and logging is DISABLED (gives quicker touchscreen response in module)
Windows XP SP2, full install (nothing stripped)

I LIVE on XM - it's my main source of entertainment in the car - and I have no real usability issues - not to the degree that I see people talking about here. i.e., resume from hibernate is fine; channel's refresh as appropriate; dropouts are only from it seemingly not using the terrestrial signal as applicable - but that "should be" automatic within the receiver, I don't think it's a CF issue.

A side thought to looking for problems is to check the NAV module. It defaults to owning COM1 and would interfere with an XM receiver on that port.

Hope that helps!

thanks midi... when you say satcomm.dll, do you mean satradio.dll? where did you get version 1.43 from? the one that comes with CF 1.42 is 11/10/07

**midiwall** · 01-05-2008, 12:39 PM

Originally Posted by Lithoss

thanks midi... when you say satcomm.dll, do you mean satradio.dll?

Whoops, yes.. I fixed it in the original message.

where did you get version 1.43 from? the one that comes with CF 1.42 is 11/10/07

It was one of the interim releases that Scott had put out. Head up to the first post in this thread for details. And, it looks like he still has it online for download:

http://www.scottpm.com/cf/satradio/SatRadio_1_430.zip

or in general:
http://www.scottpm.com/cf/satradio/

**Nola111** · 01-05-2008, 01:55 PM

Originally Posted by smeesseman

I see the problem but not sure why it is happening, I can't reproduce it here. Try the following two satradio.dll downloads, run both of them, let me know how they work for you, and send me the log for each one, let me know which log is which too... Thanks for your time in tracking this down...

Scott, really sorry about this... these are LONG overdue. I don't know if this is moot now since you've released 1.461, but here are 3 logs for you. The first 2 are the ones you originally requested from me, and the third is the log using 1.461 (which may or may not be one of the same SatRadio.dll I already tested above).

In all 3 cases, it's not good news. Still no station information refreshing without manually pressing the channel.

**Nola111** · 01-05-2008, 01:58 PM

Originally Posted by Nola111

The proper line is selected but CF does not unmute the playback line of SPDIF.

Yes, if I manually unmute it, I can hear audio.

No, if I switch to Media, CF does not remute the line for me.

David,

any luck with further developments on the unmuting of SPDIF playback line?

Thanks.

**Lithoss** · 01-05-2008, 03:52 PM

Originally Posted by midiwall

Whoops, yes.. I fixed it in the original message.

It was one of the interim releases that Scott had put out. Head up to the first post in this thread for details. And, it looks like he still has it online for download:

http://www.scottpm.com/cf/satradio/SatRadio_1_430.zip

or in general:
http://www.scottpm.com/cf/satradio/

righto, thanks yet again.

well, i dont know what the difference is... but i cant get XM to work at all with CF v1.20+, no matter what version of satradio.dll. however, satradio.dll 1.43 works in CF 1.20.

NEW FIND: I seem to have found a solution to my hibernation problems with CF 1.20! On my test box, whenver i came back from hibernation or even started CF for the first time, it seemed that it wouldnt work unless i jump started the COM1 port with xmtest.
However, i hadnt been running CF as the shell. I made the CF the shell during my fiddlings and voula! it works fine now!!!. so it seems CF has trouble initializing the COM1 port with explorer.exe as the shell.... midi have you tried your setup without CF as the shell? i suspect not

i shall keep fiddling.

**midiwall** · 01-05-2008, 04:54 PM

Originally Posted by Lithoss

midi have you tried your setup without CF as the shell? i suspect not

Well, I hate to blow a hole in your theory, but I don't run CF as the shell. I got in the habit of just running it as an app during the way early days since it wasn't exactly stable. Booting into the CarPC with a shell app that hangs wasn't pretty.

The jumpstart thing is interesting... Are you sure the NAV module isn't pointed at COM1?