Thread: WTB: 31 Pin Hirose cable (part# DF9-S31-1V)

I have a sharp LQ10D344 with a Datalux controller M1023 Rev E. Judging from the pic I don't think that cable will work. On the controller there is a female hirose connector and on the actual LCD there is a male Hirose Connector. so what I need is a hirose cable that has one male and one female connector. The one you have pictured has 2 female connectors.

Does this make sense?

Thanks and let me know if you can still help me out!

Chris

The Datalux controller was made to hook right up to the display . So just take the tft controller and the tft display and push the the two hirose Connector's So you sould not need a hirose cable

excellent...thanks for the responses.

allen - I did see that you could just plug one into the other but the screen i have had this bulky backplate that needed removed. i was having troubles and also worries in damaging the screen so i thought i'd see if there was any cabling i could buy. but to my surprise she came off after a little love with my screw driver and rotozip/dremel ;o)