Results 1 to 10 of 10

Thread: FS: 10.4" LCD Setup + Touch

  1. #1
    Constant Bitrate
    Join Date
    Dec 2000
    Location
    Dayton, OH, USA
    Posts
    200

    FS: 10.4" LCD Setup + Touch

    Ok, I haven't been around for awhile, but I used to be rather active in the forums. Due to recent school loans, I've decided it may be good to part with my system. I plan on selling most my items on ebay, but I'm going to take offers on here first. Rather sell to friends and hobbiest then John Doe on ebay Below is my current LCD setup. I would like to entertain offers, and would perfer not to seperate, unless needed.

    Setup
    --------

    1x 10.4" Goldstar (LCA4E02A) 640x480 LCD

    1x Backlight Inverter Wired for LCD

    1x Monitor Male Connector Wired for Controller Card

    1x Datalux 640x480 LCD controller (These were sold in the forums back about 2 yrs ago)

    1x 10.4" Cybertouch Analog Resistive Touchscreen Layover

    1x PS2 Ezscreen Analog Touchscreen Controller

    1x Monitor Extention to go from controller to PC

    --------

    Please let me know if anyone is interested, and some possible offers would be welcome, basically I'd like to get enough to get a set of decent turntables

    I also have several small factor PCs. One Easynow Biostart PC missing power cable, also have IRman, and few other misc. items. PM me or reply if at all interested. Thank you

    Squeeky

  2. #2
    Newbie
    Join Date
    Oct 2001
    Location
    TASMANIA Australia
    Posts
    50
    you have pm

    Very interested in the Touch overlay and Controller
    95 mitsubishi Magna

    MK2 <+++++++-->80% (On Hold for MK3)
    MK3 <----------->5% (Obtaining Parts)

    pentium II 233, sproggy 2.7 ATX ps, 10 in Active Matrix VGA LCD, Custom keyboard, 802.11b Networking , Creative Remote, Relay Control

  3. #3
    Maximum Bitrate osirisdon's Avatar
    Join Date
    Feb 2003
    Location
    South Florida
    Posts
    686
    How much you want for the inverter? Very interested wanna-bee customer.

  4. #4
    Constant Bitrate
    Join Date
    Dec 2000
    Location
    Dayton, OH, USA
    Posts
    200

    I would like not to seperate.

    Just to let people know, that if you would like a seperate part, post the offer you'd like to make. Basically I'd like to get between $300-$400 for everything, but if everything can be sold seperately and I still reach that range, I'll split it up. Also if you would like to see a picutre of products I can get that to you as well.

    Thanks,
    Squeeky

    I also have a Sage Cougar-L LCD controller, that is stand-alone and asking to get $60 obo.

  5. #5
    Maximum Bitrate osirisdon's Avatar
    Join Date
    Feb 2003
    Location
    South Florida
    Posts
    686
    Ill take the inverter for $10.00 if no one else whats the screen setup and you decide to sell it separately.

  6. #6
    Newbie
    Join Date
    Oct 2001
    Location
    TASMANIA Australia
    Posts
    50
    Ill Offer $70 for the touch overlay and controller
    95 mitsubishi Magna

    MK2 <+++++++-->80% (On Hold for MK3)
    MK3 <----------->5% (Obtaining Parts)

    pentium II 233, sproggy 2.7 ATX ps, 10 in Active Matrix VGA LCD, Custom keyboard, 802.11b Networking , Creative Remote, Relay Control

  7. #7
    Constant Bitrate
    Join Date
    Dec 2000
    Location
    Dayton, OH, USA
    Posts
    200

    Image of Setup

    The card to the complete left is the Sage Cougar-L

  8. #8
    Newbie
    Join Date
    Feb 2003
    Posts
    2
    I'll take the sage lcd controller.

    and i offer $100 for the datalux lcd controller with the hirose cable if you decides to sell them separately.

  9. #9
    Constant Bitrate
    Join Date
    Dec 2000
    Location
    Dayton, OH, USA
    Posts
    200

    Info on sales

    Ok guys here is plan. Currently there is not insterest in all products. Neorx, the Sage controller is your cause it was not part of the package. PM me and we will discuss payment, if you didn't get my earlier PM. I'm going to leave this thread up, but on monday, I'm going to place the 10.4" setup on ebay. Now this is only if no one here makes an offer on the lot, or if no one shows enough interest to reach the total in the 300's (when sold seperately) Upon placing the items on ebay, I will have a reserve in the $300 range. If that reserve is not met, I'll then seperate, and not worry about selling the entire lot. That way I can keep the parts in the Mp3Car community. Sounds stupid, not going to more money, but this forum has helped me a lot in the past, and would perfer to keep items in the community. So I'll leave the items up for grabs till the end of the week, then place setup on ebay, if doesn't sell, I'll then seperate and sell at first come first serve, and those that made offers already, they will stand for after the auction too.

    If this is confusing sorry, stressful day at work.

  10. #10
    Constant Bitrate
    Join Date
    Dec 2000
    Location
    Dayton, OH, USA
    Posts
    200

    bumpski

    Bumpski

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •