Results 1 to 3 of 3

Thread: WTB/Trade/FS: LCDs or Find LCD Controller

  1. #1
    Constant Bitrate
    Join Date
    Jul 2000
    Location
    Hampton, GA , USA
    Posts
    146

    WTB/Trade/FS: LCDs or Find LCD Controller

    Here's the deal. I had an old laptop quit on me so I pulled the LCD from it. The screen was in perfect working order before the computer quite working. I have tried searching all over for some sort of controller or anything with no luck.

    I have 3 screens right now and they are collecting dust. I would like to use the 10.4" screen in my setup but I cant find a controller that will work for it. Thing is the connectors on all of these screens are 50 pin connectors. I have seen posts of connects for LCDs with 31pins. Below are the specs:

    IBM ThinkPad Screen
    10.4" TFT
    PN: 30H0100
    EC: E15348
    SN: 003272
    Misc: 1MN8A003272
    Models: 365C, 365CD, 365E, 365ED
    --------------------
    WinBook
    12.1" TFT
    QTY: 2 (One is iffy on working, may need knew cables)
    LG Semicon Inc.
    Model: LP121S2
    SN: 51109
    --------------------
    Compaq Presario 1220 12.1" DSTN
    LCDMODULE A
    LM-JK63-22NTR
    10F50165297Z26

    50M100B30-S0
    V806L0K01AVXXXXX

    If anyone has a 8.4" TFT that they would want to trade for any of the screens that would be an easy install with a controller just email at [email protected] Also if anyone knows of a controller that would work with the 10.4" Let me know as well. Thanks!
    System Status - Starting Over
    Computer: None

    Vehicle: Silver 2002 Malibu

  2. #2
    Constant Bitrate
    Join Date
    Jul 2000
    Location
    Hampton, GA , USA
    Posts
    146
    Bump. Anyone know anything of these screens? If no one has a controller that will work with these then they are up for sale.
    System Status - Starting Over
    Computer: None

    Vehicle: Silver 2002 Malibu

  3. #3
    Banned Motorcity's Avatar
    Join Date
    Apr 2003
    Location
    Detroit, MI
    Posts
    984
    your 12.1" lg panels have a 41 pin hirose connector. you may have an extension/converter cable that makes it 50 pin as you say, but the interface is 41 pin. we do have a vga only and a vga/rca controller that works well with those panels. it is the same controller we are selling with our 12.1" nec and lg panels.
    comes with controller, osd board and all cables. lg brand inverter available if needed for 15.00.
    vga only is 239.00 +sh
    vga/rca is is 309.00 plus sh
    these controllers are made by dicon and are higher quality than most so they cost a bit more.
    Motor City Technologies

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •