look for datalux displays but they go around $150 and up (touchscreens) =>ebay
I need a 10.4" LCD for retrofit on an older portable PC. It originally has liquid plasma which hurts the eyes. I can only use 640x480x16, so pretty much anything that will fit will work. I have about an inch of extra mounting space around the display area and about 1.5"of depth in the enclosure. I'm not sure what the voltage supply is yet. it must have built-in or small controller to accept VGA input, as there is not any usable space outside the display housing.
I am hoping to spend less than $150, but hoping never gets me anywhere...
** edit **
Brightness is not much of an issue, 100 nits+ would be preferable
look for datalux displays but they go around $150 and up (touchscreens) =>ebay
Danny.
"If today was perfect, there would be no need for tomorrow."
My Car Project® ‹== !10.4" Allbrite, touchscreen, epia, 150opus, gps, wireless, sony remote [old] 128x64 Crystalfontz +double din [new]
heh good luck. I payed 150 for my first initial screen. Once all said and done, and working I spent over 500 dollars.
Thats why you gotta do it right the first time, so you dont do it twice.
Just to clarify, any working combo will suit me there is ample space for the panel, and I can make room for the controller. So there will be no need to do it more than once.
I have just the thing for youand ill let it go for $150. I bought it here a while ago and now im getting a brighter screen.Originally Posted by technojunkie
1x 10.4" Goldstar (LCA4E02A) 640x480 LCD
1x Backlight Inverter Wired for LCD
1x Monitor Male Connector Wired for Controller Card
1x Datalux 640x480 LCD controller (These were sold in the forums back about 2 yrs ago)
1x 10.4" Cybertouch Analog Resistive Touchscreen Layover
1x PS2 Ezscreen Analog Touchscreen Controller
1x Monitor Extention to go from controller to PC
The touch screen is very quirky, but it seems you dont need that. Its all working, so if you want it, just say the word.
Mike
Bookmarks