FS: Datalux LMV10R 10.4" TouchScreen LCD Display

**kandyman676** · 10-23-2004, 02:47 PM

This LCD was orginially intended to modify my first mp3car project, but I had fallen to unemployment and never finished the project off. I have since then started with newer equipment that does not allow me to output the video at 640x480, and also do not need this LCD anymore since I have a fold-out dash.

The LCD is industrial tough casing made fo limited space and mobile applications. There are no scratches on the screen or dead pixels. The touchscreen has no dead areas. It has a resistive touchscreen, so it can be operated with a gloved hand or a stylus. It takes 12 volts DC, perfect for the car environment off the battery or power

General specs:
- 640x480 resolution
- 10.4" Diagonal Display
- 200 nits
- 1.36" thick
- Wide Viewing Angle
- Weighs under 5 pounds (just the LCD...the mount and all are solid steel and add an addtional 10 pounds)

More specs can be found on the manufacturer's website:
http://www.datalux.com/monitors/lmv10_specs.asp

More Pictures:

This is running at 800x600, which will produce the resolution problem. I remember it working perfectly at 640x480, but have no older computers anymore that can show that resolution for a picture.

LCD's back with the mount backplate.

I orginally purchased this LCD from ebay on 3/13/2002 for $315 and only used a few times in testing at home. The unit is sold AS-IS.

I am asking $200 or best offer. Shipping will cost the buyer about $15 by ground in the continental US. I accept PayPal only.

PM if you are interested. First come, first serve :-)

**blazinlow** · 10-24-2004, 03:13 AM

if you decide to come down in price I may be interested. I bought the one I have now for $100, so Im looking to spend the same amount. If you live near Cecil County MD I could meet you and give cash

**kandyman676** · 11-06-2004, 03:45 PM

This item has been posted up on ebay at http://cgi.ebay.com/ws/eBayISAPI.dll...tem=5137227402

Starting bid is $75 :-)

**Malenko** · 11-07-2004, 01:18 PM

you can enable VGA mode in windoze XP and run that rez. I have a MAME machine with a 27" screen that only supports 640x480 and I havent had any problems

**kandyman676** · 11-07-2004, 02:22 PM

this item has been sold! thanks everyone who has looked at this item :-)

**rymezan90** · 12-06-2006, 10:13 AM

dear sir..

i am interested about the datalux touch screen lmv10r.please contact me or email to me how to contact you.Ineed the thing urgently due to out of source.contact me through email rymezan90@yahoo.com or directly call me at +60175417025.We would like to order 2 sets from you.Pls do not hasitate to contact me if you need any information about the deal.

regards

Raymezan YZ
Malaysia