WTB Lilliput button/LED board

**romeov** · 09-19-2005, 06:17 AM

Ok, I know that was confusing.. I mean the board at the bottom of the lilliput that is attatched via a small ribbon cable and has all the power volume, av buttons on it and LED's.

My non-touchscreen lilliput was installed and working perfectly, I mean PERFECTLY until last night when it never stared again.. no power, no led, nothing. dead.

This makes no sense, but the only thing I can figure (after taking it inside, reseating every cable, hooking it up to ac adapter) is that the button circuit board may be the problem.

see, I was trying to hook up the remote extention, but in the menatime just let the circuit board hang on my dash with no protection. I had no problem for like 2 months, not a single glitch, I never hit it, or moved it.. but I can only assume this is the problem.. I'd like to try another one, does ANYone have a broken board or replacement they are looking to get rid of? or know where I could buy one? thanks guys! you rock.

PS. I know the small ribbon cable needs to be seated all the way to the right to get power. I tried it left right, center, you name it about 40-50 different times, so I know this is not the problem, I'm off to check the fuse now.

**jcdillin** · 09-19-2005, 07:57 AM

I have a spare if you need it, but i'm willing to be it's just your fuse that is blown and you dont really need a new button PCB.

**romeov** · 09-20-2005, 06:44 AM

awesome man, I appreciate it.. I'm going to try bypassing the fuse momentarily just to see if it will turn on.. if not, I'll be in touch!

**romeov** · 12-07-2005, 12:52 AM

Ok, it's months later since this post was started, BUT I think I may have figured it out! I finally got the fuse replaced, and it is still dead. And after looking at this button/LED board, I noticed the ribbon cable attached to it.

Now remember, this small board was hanging on it's own, out in the car because I couldn't extend the IR eye yet, and it looks like frm the constant bending, or bouncing around, the ribbon cable may have been bent a few too many times and broke off inside. I can't be sure, but I would bet this is it. SO, I am indeed still looking for a LED/Button board for my lilliput, but now definetly want the small ribbon cable that attaches it to the main board as well, anyone got any? thanks guys!