Thread: FS: Lilliput 7" touchscreen in manual in-dash housing

SOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSO LDSOLDSOLDSOLDSOLDSOLD

Basically it is one of these:
http://www.mp3car.com/store/product_...products_id=33

Inside one of these:
http://www.digitalww.com/indashhousing.htm

Which is basically the same as this:
http://www.digitalww.com/DWW-700H.htm

It is a manual in-dash fold out 7" Lilliput touch screen that tilts up and down, and pivots left and right. One VGA input, two RCA video inputs, USB touch screen, and remote.

I did the conversion myself using the DIY on Armen's site. The touchscreen and the touchscreen controller have been replaced with the better ones from Armen's site. I used a ribbon cable instead of the thick original cable inside the housing to improve how it folds away. I did the Coyote auto-on mod that causes the screen to auto turn on when it receives power. I also installed a fold away auto off switch so the screen will turn itself off if it is folded away.The screen power connectors have also been replaced with molex connectors if you want to run the monitor off of your PSU.

I haven't had any problems with this monitor since I replaced the touchscreen a year ago. Now I'm selling the car and when I get a new one, I'm gonna do a flush mount screen. Not shown in the pictures is the Lilliput CD that is included.

I'm looking to get $330 PLUS the cost of how YOU want it shipped.

SOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSO LDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLD SOLD

Here are some pics: