Page 14 of 45 FirstFirst ... 456789101112131415161718192021222324 ... LastLast
Results 131 to 140 of 443

Thread: NiteMaxx digital night vision camera

  1. 03-12-2006, 12:51 PM #131
    thanatos106
    thanatos106 is offline
    Para Laura thanatos106's Avatar
    Join Date
    Nov 2004
    Location
    Miami Beach,FL U.S.A
    Posts
    3,497
    Quote Originally Posted by NiteMax Mark
    The lens looks perfect.

    Should we start a new NiteMax LCD Thread?

    - Apply 12v DC on JP1 Pin 11
    - Attach Ground to JP1 Pin 9
    - On the pads near JP1, connect a 5k Ohm potentiometer between the "5v" pad and the "Gnd" Pad. Connect the center (wiper) pin of the potentiometer to the "Brt" pad.
    - Feed the video signal in on JP1 Pin 5

    Here's the LCD Controller Board...




    Pin Name... I/O Pin Description...................... Remark
    --- ------- --- ------------------------------------- ----------------------------------
    1.. /Hsync. .O. Horizontal Sync...................... Output for specific Application.
    2.. /Vsync. .O. Vertical Sync........................ Output for specific Application.
    3.. NPC.... I/O NTSC/PAL mode selection.............. Note 1
    4.. SW..... .I. Composite/Analog RGB Signal Selection Note 2
    5.. CVS.... .I. Composite Video Signal Input.........
    6.. Bin.... .I. Separated Blue Video Signal Input....
    7.. Rin.... .I. Separated Red Video Signal Input.....
    8.. Gin.... .I. Separated Green Video Signal Input...
    9.. GND.... .-. Ground...............................
    10. GNDS... .-. Ground...............................
    11. Vin.... .I. 12 Voltage DC Input..................
    12. GNDS... .-. Ground...............................
    13. COL.... .I. Color terminal adjustment............
    14. LR..... .I. Left/Right scan selection............ Note 3
    15. UD..... .I. Up/Down scan selection............... Note 4

    Note 1: Default is auto detect for NTSC or PAL system.(Controlled by internal UPS015) High for NTSC mode and Low for PAL mode.

    Note 2: Default is Composite Signal (Low); High is for seperate Analog RGB signals.

    Note 3: Default is reversed scanning (High) and Low is for normal scanning (L —›R).

    Note 4: Default is reversed scanning (High) and Low is for normal scanning (U —›D).


    Yes I vote that we start a new thread where we can put all the tecnical info.

    Thanatos.
    RexBruMet Skin for FrodoPlayer

    Nissan Aux-in MOD


    Quote Originally Posted by bgoodman
    We're an international forum, post in whatever langauge you like.
  2. 03-12-2006, 01:29 PM #132
    pyrotechnique
    pyrotechnique is offline
    Newbie
    Join Date
    Feb 2006
    Posts
    28
    does anyone know if there is still the possibility of getting any more of these cameras?
  3. 03-12-2006, 01:32 PM #133
    icecore
    icecore is offline
    Constant Bitrate icecore's Avatar
    Join Date
    Aug 2005
    Location
    Estero, FL
    Posts
    221
    Send a message via AIM to icecore
    PM Nitemaxx Mark, he still has them!!!
    Asus MicroATX with GeFore 6100, Mobile Sempron 3300+, 1Gig Ram, 320GB 3.5" 7200UPM HDD, M2-ATX, Gain/Xenarc 7"

    Fast IS my copilot
  4. 03-12-2006, 07:36 PM #134
    Peoples
    Peoples is offline
    My man uses Levitra. Peoples's Avatar
    Join Date
    Dec 2004
    Location
    Maryland
    Posts
    2,024
    oh snap.....i didnt realize i was on the list
    PC Components:
    Lilliput; XPC/FLEX mobo; 1.7 ghz P4 Mobile;512 DDR; 160 gb HDD; opus 150; slot usb dvd-rw
    My work log
  5. 03-13-2006, 12:46 AM #135
    NiteMax Mark
    NiteMax Mark is offline
    Constant Bitrate NiteMax Mark's Avatar
    Join Date
    Feb 2006
    Posts
    112
    NEWS FLASH!

    I apologize to everyone for the longer than predicted delays. I have good news for the remaining members who are still waiting for the cameras.

    As of tonight, I have assembled and tested the remaining cameras -- everything is finally ready to go!

    At the risk of filling up my In Box again, I'll spend the next few days contacting everyone on the list and making arrangements for payment and shipping.

    The cameras are Stealth Black Ultra NiteMax with Color CCD and 2x Digital Zoom. The cost is a mind-boggling $20 plus the actual cost of USPS shipping by Priority Mail. They won't include a lens, battery or charger, but I can refer you to a source for these if you're interested. For the purposes of calculating shipping, you can use USPS.com to find the cost of 1-LB. 4-Oz. Priority Mail between 79905 and your Zipcode.

    The additional good news is the fact that I have salvaged enough parts to build an additional five cameras. I know there are some people who have expressed an interest, but missed out on the first list of 20. I am going to start a list for the five additional cameras. If more than five people respond, I am thinking that I'll need to setup an eBay auction and let all of the interested parties sort things out by bidding. More details will follow on the extras after I have satisfied the original 20 members.

    There's further good news for those who are brave enough to provide 12v DC for the various inner NiteMax parts. For those who are interested, I have a dozen pewter/silver cameras without the Power Supply Board. These have all of the same working parts as the NiteMax cameras above except that you'll need to power everything yourself and reproduce the button functions. If you intend to gut the NiteMax and install it in parts in different locations inside or outside the vehicle, this may be the best choice for you. These are also available for $20 each.

    Thanks again to everybody for their patience!
  6. 03-13-2006, 12:49 AM #136
    pyrotechnique
    pyrotechnique is offline
    Newbie
    Join Date
    Feb 2006
    Posts
    28
    i want one of the NiteMaxx ones! sign me up!
  7. 03-13-2006, 02:24 AM #137
    rev2
    rev2 is offline
    Banned rev2's Avatar
    Join Date
    Dec 2005
    Posts
    125
    I'll take another NiteMax
  8. 03-13-2006, 05:43 AM #138
    dtran01
    dtran01 is offline
    Low Bitrate
    Join Date
    Feb 2005
    Posts
    68
    me! i'm in!!
  9. 03-13-2006, 07:04 AM #139
    PCModifiers
    PCModifiers is offline
    Low Bitrate PCModifiers's Avatar
    Join Date
    Dec 2005
    Posts
    78
    I guess I am #4
  10. 03-13-2006, 08:08 AM #140
    ukchris
    ukchris is offline
    FLAC ukchris's Avatar
    Join Date
    Nov 2003
    Location
    Massachusetts
    Posts
    1,458
    Mark,

    When you have a moment drop me a mail about the LED arrays would you, as before, no hurry, just making sure you didn't forget

    I'm interested to know what is involved in making my BW camera into a color one too if possible.

    Chris.
« Previous Thread | Next Thread »

Similar Threads

  1. BMW E30 install with night vision
    By tekta in forum Show off your project
    Replies: 24
    Last Post: 07-01-2006, 03:41 PM
  2. Digital Still Camera as video feed (i.e. for reverse camera, etc)
    By meatwad in forum General Hardware Discussion
    Replies: 2
    Last Post: 01-26-2005, 06:50 PM
  3. low light night vision camera USB
    By Tred in forum General Hardware Discussion
    Replies: 8
    Last Post: 01-05-2005, 04:27 PM
  4. Is non-IR rearview camera visible at night with reverse lights on?
    By hd54321 in forum General Hardware Discussion
    Replies: 6
    Last Post: 07-23-2004, 04:21 PM
  5. Cheap camera with night vision
    By mxxxxxm in forum General Hardware Discussion
    Replies: 6
    Last Post: 06-04-2003, 12:55 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules