Results 1 to 9 of 9

Thread: F/S - Custom Bezel, Morex System and Misc.

  1. #1
    Newbie
    Join Date
    Aug 2004
    Location
    Atlanta Ga
    Posts
    50

    F/S - Custom Bezel, Morex System and Misc.

    Looking at getting rid of this custom built system. Case/MotherBoard/HDD/Processor/Memory/DVD-CDRW Drive/Wireless - $775.00 Shipped.

    For pictures go to this link http://www.logicsupply.com/product_i...roducts_id/484

    Specs for the Morex 3677 System:

    M/B
    Supports Intel® Pentium® 4 processor up to 3.06 GHz Willamette, Northwood processor. 533/400 MHz system bus

    Features
    • Intel 82845GV Graphics and Memory Controller Hub (GMCH)
    • Intel 82801DB I/O Controller Hub 4 (ICH4)
    • 1 x DIMM slot Supports up to 1GB DDR266/333 SDRAM
    • One on-board 2.5" hard disk drive IDE connector
    • One on-board 3.5" hard disk or optical drive connector
    • Realtek® ALC650 AC'97 3D Audio CODEC, Interface 5.1 channel 3D audio
    • S/P DIF digital audio encoding signal input and output
    • Intel® Extreme Graphics with 266MHz VGA core and 256-bit 3D engine
    • Realtek® RTL8101 10/100M Fast Ethernet Controller

    I/O interface
    2 x PS/2 connectors (keyboard & mouse)
    1 x LAN RJ-45 connector
    4 x USB2.0 ports (2 x rear)
    2 x IEEE 1394 ports (1 x rear)
    3 x Rear audio jacks (Line-in | Line-out | MIC)
    1 x Parallel Port
    1 x S/P DIF connector


    Included with System
    1 x Motherboard
    1 x Intel Celeron 2.0 GHZ Processor
    1 x 40 GB 2.5 Notebook Hard Drive
    1 x 512 MB PC3200 DDR Memory
    1 x DVD/CD-RW Slim Drive
    1 x D-Link 11 MB USB Wirless
    1 x User’s manual
    1 x Driver CD
    1 x IDE cable 40 pin (3 connectors) for 3.5" HD or optical drive
    1 x IDE cable 44 pin (3 connectors) for 2.5" notebook HD
    1 x Floppy drive cable
    1 x I/O shield

    Will also Include a fresh load of Win XP Pro Service Pack 2 and Win Office Enterprise Edition (Full Office Suite), Full version CD's will be included that DO NOT HAVE TO BE REGISTERED! (That's worth hundred's alone).

    Case - Follow this link http://www.logicsupply.com/product_i...roducts_id/148

    ---------------------------------------------------------------------------------------------
    Combination USB Keyboard/Mouse

    Fits in Glove compartments, like a glove!

    If you could find one, which are nearly impossible will cost $100.00 +. Will sell for $85.00 shipped.


    ---------------------------------------------------------------------------------------------
    Opus 150 Watt DC-DC Power Supply - $135.00 Shipped

    More info on it here
    Small silver box to the left


    ---------------------------------------------------------------------------------------------
    Last but not least

    Lilliput 7" VGA Touchscreen Monitor custom mounted for Neons and SRT4's. I did all fabrication myself. I tried 4 different shops that did custom fiberglass work and was quoted anywhere from $1500.00 - $2500.00 :wah?!: I am selling this complete setup with all original documentation, all power supplies and box for $850.00 Shipped.

    Also, I have an extra front bezel for the monitor, so it can be removed from the stock bezel housing if need be. The monitor itself is not permemently molded to the bezel.



    Here is the system booted up


    Specifics about the monitor can be found here

    As a complete package deal including the Monitor in molded bezel, VGA cable (worth 75.00 alone), USB for the monitor to computer, PC, Keyboard/Mouse and Power Supply will be $1700.00 Shipped.

  2. #2
    Newbie
    Join Date
    Aug 2004
    Location
    Atlanta Ga
    Posts
    50
    Just updated with specs and pictures.

  3. #3
    Newbie
    Join Date
    Aug 2004
    Location
    Atlanta Ga
    Posts
    50
    Putting it TTT.....

  4. #4
    Newbie
    Join Date
    Aug 2004
    Location
    Atlanta Ga
    Posts
    50
    No resonable offers will be turned down and willing to seperate, ie not sell as a whole system.

  5. #5
    Newbie
    Join Date
    Feb 2006
    Location
    Oklahoma City, OK
    Posts
    54
    how much for the case if you can do that seperate?

  6. #6
    Newbie
    Join Date
    Aug 2004
    Location
    Atlanta Ga
    Posts
    50
    Quote Originally Posted by dkguitarist
    how much for the case if you can do that seperate?
    The pc and case won't be seperated, I want to sell that as a complete unit. I still have the internal supply board and a/c adapter for it too. Shoot me a pm with an offer, you never know...

  7. #7
    Newbie
    Join Date
    Feb 2006
    Location
    Oklahoma City, OK
    Posts
    54
    well i bought a carputer a week ago off a guy and got it yesterday. all i need is a case (amont other misc items).

  8. #8
    Newbie
    Join Date
    Aug 2004
    Location
    Atlanta Ga
    Posts
    50
    Putting it back on top...need cash for road race slicks and brake parts.

  9. #9
    Newbie
    Join Date
    Aug 2004
    Location
    Atlanta Ga
    Posts
    50
    Bumper Baby Buggy....to the top.

Similar Threads

  1. Replies: 85
    Last Post: 07-09-2007, 05:44 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •