Results 1 to 8 of 8

Thread: 10.4" sunlight readable touchscreen

  1. #1
    DCS
    DCS is offline
    Low Bitrate
    Join Date
    Jan 2005
    Location
    Winfield, KS
    Posts
    65

    10.4" sunlight readable touchscreen

    I found this while browsing on eBay:

    http://cgi.ebay.com/Litton-MobileVu-...QQcmdZViewItem

    I'm sure someone here will be interested in this.

  2. #2
    Constant Bitrate anik321's Avatar
    Join Date
    Nov 2004
    Posts
    143
    640 x 480 262k colors ?
    99' V6 Solara SE.
    '05 CBR600RR
    Baltimore MD.
    Shuttle XPC| 512MB | 120GB 3.5" Seagate
    Opus 150W PS | Rikaline 6010 GPS
    7" Lilliput 619 | Centrafuse | IGuidance 3

  3. #3
    Super Moderator. If my typing sucks it's probably because I'm driving.... turbocad6's Avatar
    Join Date
    Oct 2004
    Location
    NY
    Posts
    6,234
    that's a nice setup to use for the box, backlight & touchpanel maybe, but the screen itself & the controller are most likely crap... this combined with a better screen can be sick... if you have the room for it that is

  4. #4
    Banned Motorcity's Avatar
    Join Date
    Apr 2003
    Location
    Detroit, MI
    Posts
    984


    bad thing is, the backlight assembly is fitted to the lcd. and, the bl assy is of limited use as far as what panels it will fit.
    I have a few of them here (the backlight assemblies and inverters, not those monitors)
    I suspect that those units on ebay are probably in need of a ccfl overhaul.
    unless the seller picked them up dirt cheap.
    At one time those montors sold for 5k each!
    I attached some pics of the bl assy. and inverter for ****s and giggles.
    Attached Images Attached Images    

  5. #5
    Super Moderator. If my typing sucks it's probably because I'm driving.... turbocad6's Avatar
    Join Date
    Oct 2004
    Location
    NY
    Posts
    6,234
    that's a really cool inverter... do you have any pictures of inside the lightbox/ccfl's?...

    yeah, the other problem like you mentioned, is ccfl's do have a limited life, & if these have been in sevice for 5-6 years, chances are what used to be a 1,300 nit backlight, is now maybe a 600 nit backlight...

    in the end, all your really buying here are parts.... cool stuff to play with, but as an assembly not really so hot to use as is....

    wish I had 2 of those to play with right now for a project I'm working on....

  6. #6
    Newbie
    Join Date
    Jul 2006
    Location
    Plano, TX
    Posts
    48
    Quote Originally Posted by Motorcity View Post


    bad thing is, the backlight assembly is fitted to the lcd. and, the bl assy is of limited use as far as what panels it will fit.
    I have a few of them here (the backlight assemblies and inverters, not those monitors)
    I suspect that those units on ebay are probably in need of a ccfl overhaul.
    unless the seller picked them up dirt cheap.
    At one time those montors sold for 5k each!
    I attached some pics of the bl assy. and inverter for ****s and giggles.
    can you sell one set (backlight w/ inverter) to me?....if yes, then how much will you charge with shipping?....

  7. #7
    Banned Motorcity's Avatar
    Join Date
    Apr 2003
    Location
    Detroit, MI
    Posts
    984
    Quote Originally Posted by azhar97 View Post
    can you sell one set (backlight w/ inverter) to me?....if yes, then how much will you charge with shipping?....

    1 backlight and inverter is 199.99. shipping depends on zip code, but should be less than 10.00 with insurance.

  8. #8
    Banned Motorcity's Avatar
    Join Date
    Apr 2003
    Location
    Detroit, MI
    Posts
    984
    Quote Originally Posted by turbocad6 View Post
    that's a really cool inverter... do you have any pictures of inside the lightbox/ccfl's?...

    yeah, the other problem like you mentioned, is ccfl's do have a limited life, & if these have been in sevice for 5-6 years, chances are what used to be a 1,300 nit backlight, is now maybe a 600 nit backlight...

    in the end, all your really buying here are parts.... cool stuff to play with, but as an assembly not really so hot to use as is....

    wish I had 2 of those to play with right now for a project I'm working on....

    That inverter is a monster, power wise. It can power up to 12 ccfl's ( up to 300 or 360mm length bulbs I think), and I think it pulls 5 or 6 amps on 12v!!! Almost 75 watts I believe. I need to look at the specs again to be sure of these numbers.

Similar Threads

  1. Replies: 19
    Last Post: 04-14-2010, 07:57 PM
  2. WTB: 10.4" Sunlight Viewable LCD/Touchscreen
    By SilverGT in forum Classified Archive
    Replies: 0
    Last Post: 06-12-2004, 06:58 AM
  3. Replies: 15
    Last Post: 04-29-2004, 12:05 AM
  4. FS: My 10.4" Touchscreen LCD setup $195 shipped
    By MeanGT in forum Classified Archive
    Replies: 4
    Last Post: 03-09-2004, 02:46 PM
  5. Replies: 10
    Last Post: 02-08-2004, 03:20 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •