Thread: FS: AMD Geode NX1500 - 6.0W, 1.0V, 1 GHZ, Fanless

These chips are ridiculously hard to find. I happened to pick up a number of them, but I only needed two. I have 3 of these for sale right now. TDP is 6.0W@1V, speed is 1ghz. They'll work in almost any Socket-A board, but the KM400s are best for them. There's an article on Wikipedia with a couple other chipsets that work well. My chip is currently in a Biostar M7VIG-400 board with a KM266 chipset and it overvolts it by .13V, but it is still plenty cool enough to run fanless. T_max on these is 95C if my Googling is correct

This comes with a heatsink and clip that works fine, but I highly recommend using a larger heatsink with a 3 HOLE clip on each side for extra stability in the car. I've never had a whole lot of faith in Socket A/462/S7 single-hole clips.

$30/shipped each anywhere in the 48, or less if you'd rather pick up in Atlanta, GA.

You can find an mATX board for 25-30 on a good day and have a fanless, low power system that will kick the tar out of a comparably-clocked EPIA for half the price These are based on an AthlonXP core.