I have a couple of things up for grabs. Or go here for my other for sale thread
Prices Lowered 2/21/07
NEW Coax SPDIF to Optical SPDIF converter - $15 shipped
I went a different route and never used it. It cost me $24 with shipping. I can build a DC power supply for it so you don't have to use the AC power and will include it at no extra charge.
**SOLD**USED PW70A 70W DC-DC power supply - $15 shipped.
Works great for an EPIA board or low powered PC for use inthe house. It does not work so well in the car where the input voltage varies. That is why I replaced it with an M1-ATX.
USED ITPS (Intelligent Power Supply) - $10 Shipped.
I used this with the PW70A to regulate the input voltage to the PW70A. It can also be used to regulate power to screens or anything that needs stable 12V. It has a delay turn on/turn off built in. I stopped using it because the LDO was too much of a drop when runnign purely off battery voltage. My 3.5" hardrive would not stay powered up. I would say if your devices can work witha minimum of 11V then you should be ok. The regulation can also be bypassed and you can use this as a smart turn on device.
NEW Alpine XMA-T200RF AI-NET/Aux-IN RF modulator controller with display and remote - $45 Shipped
This came with an Alpine XM satelite radio. It was not needed at the time of install. You can use it for a stand alone Aux-In for your carputer or if you have an alpine AI-net CD changer or Satelite Radio.
For questions PM me. For Pictures see below. I will be listing more stuff later. Shipping is included for lower 48 states only. Will ship international for additional charges.
My Ebay user name is djcoolwhipp with 100% positive feedback. I am around these forums all the time so buy with confidence.
COAX SPDIF to Optical SPDIF
the ITPS works? if so i'll takeit
Car : 00' Chrysler 300M
Speakers : Rainbow Audio SLC 265 | Subs : Diamond Audio D6 12" Subs X2
Amp's : Hifonics ZXi 6006 AB | Hifonics BXi 1606 D
CarPC: HP Laptop AMD Sempron 3000+ | 1.5GB RAM | DVD+RW | 80GB 5400RPM HD | ATI R200 Video
Did you terminate the wire ends on the PW70A? As it usually has a dc brick connector on the end of the wires, and I couldnt see it in the pics. And for use on the ITPS, I would assume you hard wired..
2000 Ford Focus
system install progress....
MII10000 - 40gb laptop - M1atx - 512mb Ram - Ampie case
7" Lilliput - Audigy ZS - Slotload dvd
Still Needing** MII10000 Backplate **
There was a connector on the end of the PW70A. I removed it when I used the ITPS with it. It was all hard-wired into my vehicle at one point. If you wanted the DC connector on the end of the PW70A, I'll look around I might still have it somewhere.