All items are also listed on ebay: http://search.ebay.com/_W0QQsassZdleskQ5f2005
I started this project from 05 Mustang but decided to not finish it. Is there anyone interested in getting a Carpc for their mustangs. I have one semi built and with a 7" touchscreen and I decided no to install it. I am just going to keep the shaker 500 in. I have a double din bracket already made and the monitor is mounted and molder for a flush clean look. It is already attached to the dash install kit. I have the M2-ATX Power Supply for it as well as a roll of 4GA Blue Transparent Cable. I also have the harnesses to attach to the stock harness as well as the adapter for the door subs. I also made a fiberglass sub box for the trunk. It's custom fit for my 05 and i have a Infinity Reference 10" Mounted in it right now. I carpeted it, but it could be removed and painted for an awesome look. It fits on the left side, not the right. I can even include a small hard drive if needed. The only thing else that would be required would be a motherboard and memory. I also have a dvd burner and CB radio mounted in the glove box. I would include that. The glove box as been cut to allow room for it and everything is molded for a professional look. If anyone is interested, please let me know. Anyone could use this but may not need the harnesses. The Double Din Cage is is 7in wide so that a mini-itx board can be mounted to it and it already has a hard drive mounted at an angle so that it is level when put in the car. I also have an Abit AG8 motherboard as well as a brand new nVidia 7300GT Video Card. I will be willing to take any and all reasonable offers, thanks.