Phidgets app ?

yes I did. if I keep the 140 value the driveline speedometer is good :-)

Is the numeric speed display correct at the bottom-right of the screen? I assume it is. SNO would have let me know if KM/H speed wasn't displaying correctly.

It might help if you show me exactly what you changed on that one line in the skin.


Once we get this figured out, I will change the skin to check the speed unit and adjust the scale accordingly, so MPH will be 0-140, and KM/H will be 0-280

didn't pay attention. will check and let you know.

Also, is your speed coming from GPS or OBD? GPS speed always has a lag of roughly 1 second.

Thanks for all the info and reporting!

speed coming from GPS.
My Ross-Tech VCDS cable does not have a com port (it does not show a com port) and cannot be used as an ODB device.

My mistake. Was using miles as speed unit :sorry:
In fact I was using a version I downloaded from you website. I changed the speed unit from miles to km but forgot to do it in the new version I downloaded from mp3car :-)
I have a 10hrz GPS receiver do you think this can speed the gps lag if I set the port speed to max?

The GPS device will most likely only work with one port speed. But even 9600 bps should be enough. GPS will always have that one or two second lag.

Today I wired in my Phidget 1012 ( the 0,16,16 ADD ) model and tried to set it in the Drive line settings screen, but all I can see is 8 analog inputs in the settings screen.

Do I need to install something to get the digital outputs and inputs to show? I have no experience with Phidget devices.

Thanks, Robert

Sent from my SCH-I535 using Tapatalk 2

Did you install the phidget library21 from phidgets? http://www.phidgets.com/docs/OS_-_Wi...uick_Downloads Clockwork might have only programmed for the 1010/1018/1019 but not sure SNO

The problem is that I haven't set up a way to rename the digital inputs and outputs yet.

You can still go into the Phidgets screen and toggle the outputs. They're just all named Digital 01, Digital 02, etc. Click on the box next to the output and it should turn green to indicate it's on.

I should be able too add the digital renaming functionality this week.

And as SNO mentioned, you do need the Phidgets library installed. (i think)