Results 1 to 2 of 2

Thread: Citroen C5 2.0 HPI (2001) no voltage on pin 16

  1. #1
    Newbie
    Join Date
    Aug 2007
    Posts
    3

    Thumbs down Citroen C5 2.0 HPI (2001) no voltage on pin 16

    Hello

    I just brought the ELMSCAN 5.
    I own a Citroen C5 2.0 HPI from 2001.
    In the OBD-2 specs it states that: pin 16 has 12V but no voltage there at all!
    On ďservice.citroen.comĒ itís stated that 12V is on pin 1 (when the ignition key is turn on)
    I found this to be true and thinks I need to make a new cable for the ELMSCAN 5 in order to get it to work.
    Does anyone have any experience with the C5 and OBD-2?

    Best regards

    Carsten

  2. #2
    Newbie
    Join Date
    Aug 2007
    Posts
    3

    Smile Take 12V from cigar lighter plug

    Hello

    I made a adaptor to put between the ELMSCAN5 and the OBD-cable.
    Gnd, signal-gnd, K-line is passed on but pin 9 (12v) is taken from cigar lighter plug.
    Now the interface powers up and I can "talk" to the car.

    Yhaa!

Similar Threads

  1. BMW E46 Owners with DSP systems and no HU
    By edrock200 in forum Newbie
    Replies: 23
    Last Post: 05-24-2012, 10:59 PM
  2. Core Duo / Core 2 Duo Mini-ITX boards
    By RedGTiVR6 in forum General Hardware Discussion
    Replies: 153
    Last Post: 10-03-2010, 10:30 PM
  3. Indexing music in 1.0.9.8 Failed
    By hovalistic in forum StreetDeck
    Replies: 0
    Last Post: 07-07-2007, 11:19 AM
  4. 2001 CitroŽn Xsara VTR 2.0 HDI in-dash TFT
    By saxgod in forum Show off your project
    Replies: 13
    Last Post: 06-15-2005, 10:16 PM
  5. 2X20 char lcd, pin 15 neg Volt, pin 16 - NC.. Need help wiring!
    By adam1972 in forum General Hardware Discussion
    Replies: 2
    Last Post: 09-24-2001, 09:09 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •