LinkBack URL
About LinkBacks
Reply With QuoteYeah that would be VERY nice to have, I could program all kinds of wonderful OBD related with that.
Hi guys,
I would like to implement ODB-II interface to my carpc. I have seen many interfaces that runs on proprietary softwares without source codes.
Do you know if there's an interface with VB OCX support?
I have found a software on OBD2crazy.com for ELM 32x interfaces which provide an OCX. Is there anyone who tested this?
Thank you for the support
-NicGalla-
custom-made aluminum case | MK2.8+ PSU | EPIA 800 | 256 Mb DDR | 120 Gb 7.2k WD | Wireless Chieftec mouse & keyb | Trust USB Keypad & USB webcam | Majestic TFT 7" 16:9 | WinXP & ME2 | connected to factory head-unit in a PT Cruiser 2.0L
Yeah that would be VERY nice to have, I could program all kinds of wonderful OBD related with that.
this thread has been done
Provide a link or something man, don't just **** on the guys parade and leaveOriginally Posted by BoraXP
BoraXP you're wrong. I made a search here before posting and didn't find anything interesting.
I hope there's someone who's willing to test ODB2crazy.com software with ELM323 chip
-NicGalla-
custom-made aluminum case | MK2.8+ PSU | EPIA 800 | 256 Mb DDR | 120 Gb 7.2k WD | Wireless Chieftec mouse & keyb | Trust USB Keypad & USB webcam | Majestic TFT 7" 16:9 | WinXP & ME2 | connected to factory head-unit in a PT Cruiser 2.0L
Dan Harrison's OBDScan is expensive but there is VB code for here
VB Code for Dan Harrison's OBDScan
Dear Admin,
thank you for your reply but since I would use ODB-II to show up gauges on the CarPC and nothing else, Dan Harrison's one is too expensive.
-NicGalla-
custom-made aluminum case | MK2.8+ PSU | EPIA 800 | 256 Mb DDR | 120 Gb 7.2k WD | Wireless Chieftec mouse & keyb | Trust USB Keypad & USB webcam | Majestic TFT 7" 16:9 | WinXP & ME2 | connected to factory head-unit in a PT Cruiser 2.0L
www.odb2crazy.com doesnt seem to work
is it a typo or a down site
?
www.obd2crazy.com
unless the Ol' Dirty B*stard is getting into carputing, anyway :P
Celica VVTi
EPIA M10000 Nehemiah, 160Gb HDD, 7" Lilliput VGA Touchscreen, Opus 150Watt PSU, Slimline DVD/CDRW, Road Runner
Hi!!!!
I need your help please!!!!
I am writing code in Visual Basic in order to communicate to the ECU with ELM interface. I don’t know very well how to write and read the commands I have to send/receive to talk to the ECU.
Could you help me please?
I’ll appreciate your help!!!
Regards
Esteban
email:esteban.trinidad@tigo.net.py
Posting Permissions
Bookmarks