Thread: Is this an OBD port or not??

Like most things ... first, you have to realise that this forum is on the majority american based, and like most other things, something that works for their car systems may (but may not) for australian cars.

OBDII is only available in models built after 1996 and then number is very small. There is a better chance of being OBDII compatible in models built after 2000.

Ok, Ok, Ok... Maybe its just upside down because its an Australian car! Get it? Because of the whole hemisphere thing? Get it? Alright, I know it wasn't that funny. And to Australia, us dumb Americans are upside down... Get it?

Its OBDII, but you're going to have to see what format. And of course, they may have swapped the connectors in your model.

Originally Posted by stimps

This port is in the australian Ford Falcon. Someone else here has plugged in a OBD 2 compliant interface and it has'nt worked. I have biult a ELM320 based interface and .....it dont work

what is it?
I know that the furtherest pin top right (with metal in it of course) is GND
and the one furtherest pin bottom left is +12. But no idea what the others is.
anyone got any clues?

My guess at some pins... 13 == Flash Voltage, 2&10 == classic USA Ford PWM, 7 == FISO (Ford ISO)

Originally Posted by stimps

This port is in the australian Ford Falcon. Someone else here has plugged in a OBD 2 compliant interface and it has'nt worked. I have biult a ELM320 based interface and .....it dont work

what is it?
I know that the furtherest pin top right (with metal in it of course) is GND
and the one furtherest pin bottom left is +12. But no idea what the others is.
anyone got any clues?

oops... can't forget pins 6&14 == HiSpeed CAN

What year is it?

yeah high speed CAN....is what im fearing....
This is on a 2002 model XR6Turbo (still brand new model actually)
I have tried and tried to source information from techs at ford via email, but of course, they keep their cards held close to their chest......BASTARDS. :P
Ive just biult and got up and running a ELM320 based interface, as someone else,
http://www.emergent.com.au/~cmoran/my_xr6.html
thinks it works, but I have emailed him and like so many people using email these days, no reply

This stinks....Ive spent so much time on this and still no results.
oh and Odessy, i HAVE googled, what on EARTH makes you think i didnt?
I have googled and googled this subject so damn much its getting obsessive!
Jyaron... thank you SO much for your input......much more appreciated than Mr "Oddessy" here, ...ill try that connection tonite


Ive noticed that from this info
http://www.scantool.net/products/obdii_cable_type_b.htm
That the GND pin lines up correct, and the J1850 Bus + pin agrees with the standard, but not the Bus -.
Also, the Standard says Pin 16 is the power. On my car its Pin 9.

Hrmm.......

cheers

Jyaron: no good dude, those pins dont even exist in the plug. There's no metal in there. Actually thats sorta good news, coz it disagree's with CAN which im hoping its not. Want another guess?

stupid bloody FORD....
somebody help me PWEAAASSE?

Originally Posted by stimps

Jyaron: no good dude, those pins dont even exist in the plug. There's no metal in there. Actually thats sorta good news, coz it disagree's with CAN which im hoping its not. Want another guess?

referencing picture: upper right is Pin 1, lower right is Pin 8, upper left is Pin 9, lower left is Pin 16

your serious?
ok that changes things:P
thanks.