DIY steering wheel remote for cars that dosent have.
So, my car is pretty old, and there was no ption of passing cables for Steering wheel remote... So heres what i did. I think is pretty easy to be done from everyone without any much specific experiences!
Normaly, since your car wont propably have airbag in the wheel, you will have plenty of space to work behind the mask of the wheel.
So, i took a usb wirless remote for the pc, and i stripped its board. as you can see the keys, are normal circuits that close when you press the normal keys. so using some Solder, i glued, cables in those circuits. (This is the only really hard part, since the job is a liitle ditailed, but since i pulled it ovwer, i think everyone can. )
this is how it looked like:
Then , drill some holes , in the mask, add the buttons of your like, fill the holes with some putty (in my case it was polyster putty), and you are done! i used as keys the numpad numbers, so with macros and hotkeys, they can do almost anything!
first layer of putty :
and finally with allot of sanding, and osme acrylic paint :