Printable View
My first attempt so be nice. :)
System Consists of Tview 7" Touchscreen with a Toshiba Portege Laptop running a stripped version Windows XP (A Powerful PII 300 w/ 160MB of Ram!!)
The Front End is Road Runner
The GPS Software I am using is Garmin's NRoute.
The Screen is held in place with a lot of Bondo. I sanded that down and put Flat Black textured paint on it.
http://209.177.215.1/skank/cp1.jpg
I LIKEY I LIKEY soon as it gets warm i will start my bondo creation : / im scared
Is this Dale Zelinsky from PPBB? :)
not going to fill those gaps?
where is the bondo? behind the screen?
that set-up could look so extremely slick if it were filled in!
Are you refering to the gaps along the top?Quote:
Originally Posted by Red GTi VR6
If yes, how do you suggest filling in such a tight area?
all of it - the top and the bottom and the sides - just flush it in and fill all the gaps - it's what bondo is used for most of the time....
The bottom can't be filled because that is two seperate pieces of the car. The OEM nav system has that gap.Quote:
Originally Posted by Red GTi VR6
Not sure what I could do with the sides.
Here is a pic of the OEM system:
http://members.aol.com/lma5479/gboxster11.jpg
Looks nice!
What would look even nicer is is you'd buy a faceplate like the one from the original nav and cut/bondo your screen in. Make it more flush even.
But it already looks nice (maybe just clean it a bit and take another pic ;))
You're a brave guy.... Not sure I would want to have a go at a Porshe Boxter. :)
It takes a lot longer than any of us ever imagine to get the finish that we are all looking for.
Bit more time with the filler and sander and you will have a really nice install.
Prem
I like that H/K reciever :)
Does it have many features? (like 3 sets of RCA outs, and an aux in)
Matt