See Post #2
See Post #2
Inside the "<io></io>" tags, when you declare your output, add the default state option.
<iochannel id="Amp Turn On" port="0" brain="MainBrain" type="digital_output">
How to set up the Anti-Thump Delay for the v3 with the software. I get the loud thump when turning on the carputer.
That makes 2 brain instances, 1 that is version 3 and 1 is version 4. That's it.Code:
<brain id="My V4 Brain" version="4">brain id 0</brain>
<brain id="My V3 Brain" version="3">brain id 1</brain>
The rest is exactly the same.
HW wise, attach the output to a relay the relay to the amp remote lead.
what type of relay to use? any one have a diagram of this type of hook up? Do I need to plug any values into the software?
so I dont need to program if I just want the v3 to turn on the amp? Just the hook the relay to the digital output of the v3? Another question,if you have the FB hook up to the 12v, the blue light is on. Even after the carputer is off it still on. Will this drain the battery? Or should it be hooked up to the acc wire to power?
Is there a way to link the turn on to after the sound drivers are loaded or will this automatically happen if MDX is placed in the startup folder?