No announcement yet.

FS Mazda 3 Car Computer:Japan Parts Navigation Box + High End Car Computer System

  • Filter
  • Time
  • Show
Clear All
new posts

  • FS Mazda 3 Car Computer:Japan Parts Navigation Box + High End Car Computer System

    Hey, All

    Well my lease on my Mazda is coming to an end and I am going to get into a crossover in July because it fits my lifestyle more now. I am planning on buying an IPad for my navigation needs in my new car so my Car Computer Navigation system setup is up for grabs.

    Asking for $650.00 OBO, the retail cost for me was over $1060.00 + shipping and taxes this is a steal for anyone that buys it, you will be saving over $600 bucks.

    The Car Computer system includes the following:

    1 Licensed copy of Centrafuse Auto With North American Maps pre-installed. (USD $129.99)
    Manufactures Website :
    1 Fresh install of Windows 7.
    1 Japan Parts dash mount navigation box. (Retail $330.00 CAN)
    1 USB GPS Receiver with long antenna for proper placement on the roof. (USD $39.99)
    1 Lilliput EBY-701 7 VGA Touch screen (Retail $220.00 CAN)

    1 Custom built Plexiglas Computer Case built to fit Mazda 3 glove box.
    1 All wiring for the Computer + harness from computer to the LCD Screen.
    1 M3-ATX Automotive Computer Power Supply (Retail $90.00 USD)
    Manufactures Website:
    1 G.Skill 2GB 240-Pin DDR2 SDRAM PC6400 Ram (Retail $49.99 CAN)
    1 250GB Western Digital 8MB 2.5 SATA 3.0GB/s Hard drive (Retail $49.99 CAN)
    1 ZOTAC IONITX-D-E Intel Atom 330 Dual Core 1.6GhZ Mini ITX Motherboard/CPU Combo (Retail $149.99)
    Manufactures Website:
    Motherboard Details:
    Model: IONITX-D-E
    CPU: Intel Atom 330 Dual Core 1.6Ghz FSB 533Mhz
    Memory Slots: 2x240 Pin DDR2 667/800 Maximum 4GB
    Expansion : 1 x MiniPCI Express
    Storage: 3x SATA 3.0 GB/s RAID 0/1/0+1
    Onboard Video: NVIDIA GeForce 9400M
    Onboard Audio: 6 Channels
    Onboard LAN: GB Ethernet
    Onboard Wireless: WiFi IEEE 802.11n
    Video Ports: D-Sub + DVI
    HDMI :1 x HDMI
    USB 1.1/2.0: 6 x USB 2.0
    eSATA : 1 x eSATA II
    S/PDIF Out : 1 x Optical, 1 x Coaxial
    Onboard USB: 4 x USB 2.0
    Form Factor: Mini ITX Dimensions 6.7" x 6.7"

    I have to note something about the LCD Screen, the screen itself is flawless and 100%. However, about 6 months after I bought it the touch screen failed in it, and I had to replace the touch screen overlay. The touch screen I replaced it works fine but it seems to be off by 1-3 mm on most presses. This is only an issue when using very small buttons in windows directly as it is not as accurate as it could be. You will not notice this when using Centrafuse though because the buttons are big and easy to hit. I repeat I have never had a problem using the touch screen it is just off a little bit. I have found that when you calibrate the touch screen if you press the xs just slightly left where it is asking you to the calibration is almost perfect.

    I would like to sell the entire thing as a package, but if you want things sepeartly then the prices are as follows

    OEM Japan Parts Navigation Box (225.00 USD)
    Car Computer, Software, M3-ATX power supply, & USB GPS Reciever (375.00 USD)
    LCD Screen (100 USD)

    Guys Pictures are below.

    <img src=" rname=Leddy&offset=-6"></img>

  • #2
    Hi I have some questions for you .. what are the Green red yellow and the 2x black wire at the right of the computer case .. How do you plug them.. second is the Lilliput monitor is in his Original Bezel or you've made a custom bezel to make it fit in the Japan navigation box ..

    and my last question : is the Japanese Navigation Box automatic or manual ??

    Thanks for your reply