Announcement

Collapse
No announcement yet.

FS: MTSVO-SC K301 motorized VGA Touch screen $130.00 (Athens, Ohio USA)

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • FS: MTSVO-SC K301 motorized VGA Touch screen $130.00 (Athens, Ohio USA)

    SOLD

    Works great! But the Eject button fell off. It still ejects by ignition as seen here:

    Sometimes you need to manually push the microswitch inside the hole with a stick (only cold days.) This can be fixed easily by replacing the plastic assembly that controls the microswitch, or wiring up a new momentary switch to the housing. Not difficult at all.

    $190.00 $175.00 $130.00 firm as it is.)
    Ships from Athens Ohio USA to anywhere in the USA.
    Please no international orders unless you are willing to pay the additional secure shipping costs.
    Method of payment: Paypal.



    You get the unit it self and a 16FT low profile VGA cable. No bezzle, no din carrier, or remote.









    My car computer project (being parted out soon)
    http://www.jeepforum.com/forum/f20/2...nstall-718397/
    Last edited by 0okami; 12-17-2011, 04:45 AM. Reason: Price Drop from 190 to 175.00 and dropped to 130.00
    ~0okami.Digital

  • #2
    Price Dropped from $190 to $175!!
    ~0okami.Digital

    Comment


    • #3
      Meh, Honestly, I'll be happy with $130.00 .
      So new Price:

      $$130.00 shipped.
      Final Price Drop.
      Last edited by 0okami; 10-09-2011, 05:12 AM.
      ~0okami.Digital

      Comment


      • #4
        Still available if anyone wants it.
        ~0okami.Digital

        Comment


        • #5
          Have you had any issues with the touchscreen? I remember mine would get iffy sometimes. Never the less, I PMed you!
          Nirwana Project, the Android/Win 7 hybrid system!

          1X Ainol Novo Flame Tab
          4X MK808b
          3x Perixx Touchpads
          3x 7 inch Screens
          1X 7 inch motorized Screen
          1x Win 7 PC

          Comment


          • #6
            Originally posted by HiJackZX1 View Post
            Have you had any issues with the touchscreen? I remember mine would get iffy sometimes. Never the less, I PMed you!
            The only issues i have had are in extreme cold temps where it will not open (protection mode by design) until the ambient warms warms up a little. I noticed this mostly at 19f or lower during winter only.
            Aside from that, no other issues noted.

            -checking pm. -


            update: im including the Low profile VGA cable (10ft or 16ft i think) and a usb extension cable for who ever buys it.

            --edit again---
            A hold has been placed on the screen pending a sale.
            Last edited by 0okami; 12-04-2011, 10:37 AM.
            ~0okami.Digital

            Comment


            • #7
              OK, I got the screen today.... you forgot to include the power cable which is no big deal. What I do want to know is what is the remote cable for, and what do I connect the park wire to.
              Nirwana Project, the Android/Win 7 hybrid system!

              1X Ainol Novo Flame Tab
              4X MK808b
              3x Perixx Touchpads
              3x 7 inch Screens
              1X 7 inch motorized Screen
              1x Win 7 PC

              Comment


              • #8
                Originally posted by HiJackZX1 View Post
                OK, I got the screen today.... you forgot to include the power cable which is no big deal. What I do want to know is what is the remote cable for, and what do I connect the park wire to.
                oh no! sorry about that. It uses a standard PCI-E power cord. The type used for Video graphics cards. I know I only used 3 wires from the connector. I will check my jeep after i get out of work and let you know how i had it wired. I didnt use the park wire. Its basicly a safety hat allows the screen to open when in park only. Useless.

                Remote is to power on a remote device like an amp. When the screen receives power, it sends low voltage power signal to another device. Or something like that. Let me check how i had it wired since the cable is still wired in my jeep. I can make note and remove the cable and send it to you if you need it. Im thinking the Park wire is just a + wire.

                Yellow (constant) to battery, red + (acc), and then park wired to acc, black grnd i think is how it had it. But let me double check to make certain. Don't wire until i get back to you.

                Can you post me a picture of the diagram on the unit and the back of the unit where the PCI-e power pluged into? This will help me help you.
                Last edited by 0okami; 12-16-2011, 04:36 PM.
                ~0okami.Digital

                Comment


                • #9
                  Originally posted by 0okami View Post
                  oh no! sorry about that. It uses a standard PCI-E power cord. The type used for Video graphics cards. I know I only used 3 wires from the connector. I will check my jeep after i get out of work and let you know how i had it wired. I didnt use the park wire. Its basicly a safety hat allows the screen to open when in park only. Useless.
                  Dont worry about the connecter. I had bought a PSU for the car, and its made for higher end PC units. So it had the 4, 6, and 8 connector. Since its a hexacore I was powering, I had to use the 8. That left the 4 and 6. I simply cut it off of that. Yea, park is useless.

                  Remote is to power on a remote device like an amp. When the screen receives power, it sends low voltage power signal to another device. Or something like that. Let me check how i had it wired since the cable is still wired in my jeep. I can make note and remove the cable and send it to you if you need it. Im thinking the Park wire is just a + wire.

                  Yellow (constant) to battery, red + (acc), and then park wired to acc, black grnd i think is how it had it. But let me double check to make certain. Don't wire until i get back to you.

                  Can you post me a picture of the diagram on the unit and the back of the unit where the PCI-e power pluged into? This will help me help you.
                  Ok, dont need remote wire. I also do not need the reverse and park. So I think im good. Also, because I'm curious, I took the unit apart and the open/close button fell out. Now here is the issue I am having. I do not want the screen to open on power up. I basically want to control it when I want. Remember this screen is going to be in my face, so I do not want it to open up all the time. I guess an easy way would be to simply make a switch for the ACC line. That should work.
                  Nirwana Project, the Android/Win 7 hybrid system!

                  1X Ainol Novo Flame Tab
                  4X MK808b
                  3x Perixx Touchpads
                  3x 7 inch Screens
                  1X 7 inch motorized Screen
                  1x Win 7 PC

                  Comment


                  • #10
                    OK, I figured the screen out. If you open the screen with the button, then cut power, it will always open when acc is applied. If you push the button before turning off the acc and it closes, it will not open with acc. You have to push the button.
                    Nirwana Project, the Android/Win 7 hybrid system!

                    1X Ainol Novo Flame Tab
                    4X MK808b
                    3x Perixx Touchpads
                    3x 7 inch Screens
                    1X 7 inch motorized Screen
                    1x Win 7 PC

                    Comment


                    • #11
                      Originally posted by HiJackZX1 View Post
                      OK, I figured the screen out. If you open the screen with the button, then cut power, it will always open when acc is applied. If you push the button before turning off the acc and it closes, it will not open with acc. You have to push the button.
                      That is correct.
                      You will notice it will not open on certain cold days (below 19F usually) until the interior warms up. Its a thermal protection so the screen wire does not simply snap. It will beep 5 times when that happens.

                      Well, I hope you like the screen. It was the best car computer screen i have used
                      ~0okami.Digital

                      Comment


                      • #12
                        Well I live in Miami, FL... SO I doubt I have to worry. I loveeeeeeeeeeeeeee the screen, thank you so much. To bad you went traitor and went with a tablet. I was wondering, why did he give up the PC, then I saw your new worklog in the Jeep Forums.
                        Nirwana Project, the Android/Win 7 hybrid system!

                        1X Ainol Novo Flame Tab
                        4X MK808b
                        3x Perixx Touchpads
                        3x 7 inch Screens
                        1X 7 inch motorized Screen
                        1x Win 7 PC

                        Comment

                        Working...
                        X