No announcement yet.

FS: 3.5" SBC with 10.4" NEC LCD panel

  • Filter
  • Time
  • Show
Clear All
new posts

  • FS: 3.5" SBC with 10.4" NEC LCD panel

    We will post this on Ebay unless someone here wants it.

    This SBC is 12 volt only, (Wafer 5825) has an embedded 300mhz. processor, uses sodimm (up to 512mb) has PCMCIA, sound, video (both VGA and LCD out), usb, 10/100, and a dual device ide header w/44 pin notebook connector. also has mini ide connector.

    This SBC is very small, same size as a standard 3.5" harddrive!

    also includes an NEC 10.4" tft lcd panel with NEC inverter and a 2ft. lcd cable to attach the SBC to the LCD panel.

    complete specs. for this board can be found at search for the Wafer 5825 12v version.

    this board is lightly used, (in our shop for development purposes) and comes with all required cables, manual, driver cd etc.

    ***note: this board will NOT work with XP!!***

    the lcd panel was removed from a kiosk that never saw use on location. has about 2-2 1/2 hrs. on it. very nice, no dead pixels, scratches, etc.
    retail on the sbc alone is 750.00, and the panel is worth about 185.00 used.

    we are asking 425.00 plus 18.00 shipping in US
    additional sh required for outside US shipment.

    will also offer with 256mb ram (new), 5.1gb notebook hdd (used) and an 8x/24x notebook dvd rom drive (new) with IDE adaptor for 550.00 shipped in US.

    will send pics upon request.
    Motor City Technologies

  • #2
    will be on ebay today


    • #3
      item now listed on ebay


      • #4
        Hey MotorCity, you never got back to me about the 8" 18 bit screens?