Announcement

Collapse
No announcement yet.

FS: 10.4" LCD Setup + Touch

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • FS: 10.4" LCD Setup + Touch

    Ok, I haven't been around for awhile, but I used to be rather active in the forums. Due to recent school loans, I've decided it may be good to part with my system. I plan on selling most my items on ebay, but I'm going to take offers on here first. Rather sell to friends and hobbiest then John Doe on ebay Below is my current LCD setup. I would like to entertain offers, and would perfer not to seperate, unless needed.

    Setup
    --------

    1x 10.4" Goldstar (LCA4E02A) 640x480 LCD

    1x Backlight Inverter Wired for LCD

    1x Monitor Male Connector Wired for Controller Card

    1x Datalux 640x480 LCD controller (These were sold in the forums back about 2 yrs ago)

    1x 10.4" Cybertouch Analog Resistive Touchscreen Layover

    1x PS2 Ezscreen Analog Touchscreen Controller

    1x Monitor Extention to go from controller to PC

    --------

    Please let me know if anyone is interested, and some possible offers would be welcome, basically I'd like to get enough to get a set of decent turntables

    I also have several small factor PCs. One Easynow Biostart PC missing power cable, also have IRman, and few other misc. items. PM me or reply if at all interested. Thank you

    Squeeky

  • #2
    you have pm

    Very interested in the Touch overlay and Controller
    95 mitsubishi Magna

    MK2 <+++++++-->80% (On Hold for MK3)
    MK3 <----------->5% (Obtaining Parts)

    pentium II 233, sproggy 2.7 ATX ps, 10 in Active Matrix VGA LCD, Custom keyboard, 802.11b Networking , Creative Remote, Relay Control

    Comment


    • #3
      How much you want for the inverter? Very interested wanna-bee customer.
      What im curently listening to.
      My complete carpc setup

      Comment


      • #4
        I would like not to seperate.

        Just to let people know, that if you would like a seperate part, post the offer you'd like to make. Basically I'd like to get between $300-$400 for everything, but if everything can be sold seperately and I still reach that range, I'll split it up. Also if you would like to see a picutre of products I can get that to you as well.

        Thanks,
        Squeeky

        I also have a Sage Cougar-L LCD controller, that is stand-alone and asking to get $60 obo.

        Comment


        • #5
          Ill take the inverter for $10.00 if no one else whats the screen setup and you decide to sell it separately.
          What im curently listening to.
          My complete carpc setup

          Comment


          • #6
            Ill Offer $70 for the touch overlay and controller
            95 mitsubishi Magna

            MK2 <+++++++-->80% (On Hold for MK3)
            MK3 <----------->5% (Obtaining Parts)

            pentium II 233, sproggy 2.7 ATX ps, 10 in Active Matrix VGA LCD, Custom keyboard, 802.11b Networking , Creative Remote, Relay Control

            Comment


            • #7
              Image of Setup

              The card to the complete left is the Sage Cougar-L

              Comment


              • #8
                I'll take the sage lcd controller.

                and i offer $100 for the datalux lcd controller with the hirose cable if you decides to sell them separately.

                Comment


                • #9
                  Info on sales

                  Ok guys here is plan. Currently there is not insterest in all products. Neorx, the Sage controller is your cause it was not part of the package. PM me and we will discuss payment, if you didn't get my earlier PM. I'm going to leave this thread up, but on monday, I'm going to place the 10.4" setup on ebay. Now this is only if no one here makes an offer on the lot, or if no one shows enough interest to reach the total in the 300's (when sold seperately) Upon placing the items on ebay, I will have a reserve in the $300 range. If that reserve is not met, I'll then seperate, and not worry about selling the entire lot. That way I can keep the parts in the Mp3Car community. Sounds stupid, not going to more money, but this forum has helped me a lot in the past, and would perfer to keep items in the community. So I'll leave the items up for grabs till the end of the week, then place setup on ebay, if doesn't sell, I'll then seperate and sell at first come first serve, and those that made offers already, they will stand for after the auction too.

                  If this is confusing sorry, stressful day at work.

                  Comment


                  • #10
                    bumpski

                    Bumpski

                    Comment

                    Working...
                    X