Originally posted by Alives:
<STRONG>do you have a 15 foot hirose extension cable </STRONG>
you dont need one that long you extent the vga cable to your dash, which goes to the controller then from the controller to the lcd, the lcd cant me more than 10-12" away from the controller anyway, using the hirose connection.
I need your Basic 31-pin Hirose cable to connect one of these TFT to VGA controllers to my LG Electronics screen. Could someone email me or leave a post here if you have any/know where to buy one? Thanks.
i hunted and found the post regarding the last sale you had on these controllers. one of the screens listed was LG ELECTRONICS INC (LCA4VE02A,LP104V1), which i believe is the goldstar screen (same #, lca4ve02a) that i have. anyway, i was wondering if the new controllers will work with the same screens. let me know if they will work, and also if you have any left. i might be interested.
Single Member of the "1000 Post and No MP3 Car" Club
PROJECT ON INDEFINATE HOLD... BOUGHT A HOUSE
2000 Cavalier Z24 [###-------] Only 30% Done ... Still
Wondering what all I would need to connect my LCD (Sharp LQ10D421) to VGA and how much? I'm looking for it to be plug and play with no wiring needed on my part. Let me know if you have what I'm looking for and how much it would run me.
2001 Ranger XLT Off Road
Sony CDX-C910, Sony CDX-U303
Sony XA-300 USB->unilink adapter
In dash 5.8" LCD
Infinity Beta 3 way component set
4 - OZ Audio 250L 10" subs
2 Sony XES-M1's, Sony XES-M3
Esoteric Audio wiring
Toshiba 7020CT laptop with DVD docking station.