Announcement

Collapse
No announcement yet.

Need a 31 pin Hirose cable?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need a 31 pin Hirose cable?

    Update 3/24/02
    I'll track status of your orders here. See the order list below for details. I will indicate if you paid and ship date or pending ship date.

    Thanks
    Pigseye


    >>>>>>>>><<<<<<<<<<<<<<
    Some good things to know:

    I take paypals and money orders. I'm not a business so I can't accept credit card Paypals. Sorry!

    I won't be able to ship cables from 3/27 through 4/2. If you want me to ship by Monday or Tuesday of next week get payments to me by Monday.

    Email or PM if you need my addy
    [email protected]

    >>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<

    SEND YOUR PAYPALS! CABLES ARE IN!

    Prices are listed below.

    12" 1 to 1 discrete wire $19.50
    18" 1 to 1 discrete wire $20.50

    12" LQ9D161 cable $16.50
    18" LQ9D161 cable $17.50

    shipping costs are as follows using USPS :

    In the US (lower 48): $4.50 - You get tracking
    To Canada : $4.50 - No tracking
    To Australia : $7.50 - No tracking

    I'm not going to insure the cables. I just don't think it's worth it.

    Name______Cable type___qty____length
    Kardas______LQ9D161____1_____12" __Sending MO
    Mp3Z24______1 to 1______1_____18" __Pre paid__Ship 3/25
    ifdwolf_______1 to 1______1_____18" __shipped 3/22 trk# provided
    pimpybra_____1 to 1______1_____18" __pymt rec'd, ship 3/25
    Kelvinator ____LQ9D161___1_____12"
    Kelvinator ____1 to 1______1_____18"
    Etrik_________1 to 1______1_____12" __Sending MO
    Etrik_________LQ9D161____1_____12" __Sending MO
    infrared______LQ9D161____1_____12" __Pre paid__Ship 3/25
    Plaiming______LQ9D161____1_____12" __pymt rec'd - ship 3/25
    shadow______1 to 1_______2_____12"
    Nimrod______LQ9D161_____1_____18"
    Arby ________1 to 1_______1_____12" __pymt rec'd - ship 3/25
    Cptdipsht____1 to 1_______1_____12" __pymt rec'd - ship 3/25

    You guys can do your own math to figure out the payment.

    All other cables will be tested and then ready for shipping on Monday 3/25.

    Send Paypals to: [email protected]

    Thanks Guys,
    Pigseye




    >>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<
    Update 3/12/02

    All,
    Just want to say thanks to all of you for your appreciation and words of encouragement. It's my pleasure to help out but this has been incredibly time consuming to me. Much more than I had ever planned.

    A couple of points as an FYI:

    1) No extra cables were ordered. The only way there will be an extra cable is if someone doesn't want theirs. But if you ordered one, I expect you to buy it. Don't weasel out on my now!

    2) If you do not contact me with your real name and address by 3/20, I may choose to sell your cable to someone else. My option. So if you haven't contacted me do it quickly.

    3) Finally, if there are extra cables, people on the original order list will get priority. People who have not placed an order will be next. I will go by time and date of request for extra cables to prioritize the original order list folks.

    Yes, I know that doesn't seem fair, people who already have a cable can get another before someone who has no cable. But to me it is the most fairway to deal with "extras." I want to deal with the people who have contacted me during this long ordering process and had the foresight and intention before late comers. My apologies to those who missed out.

    Hope that helps clear things up,
    Pigseye

  • #2
    picture of cable

    I'll try to get a picture of my prototype cable loaded tonight.

    It uses individual wires for each connection and that's how these cables will be built.

    THe supplier also said she can provide shielding on the cable too. I'm still working on if that's an extra cost or not.

    Thanks,
    Pigseye

    Comment


    • #3
      definitly count me in, i have the 12bit screen off ebay, i think its the 161, (i think its the same screen you have) so what ever cable that needs. also will you ship to Australia?

      thanks Kardas
      http://austmp3car.tk

      Comment


      • #4
        im in! i need one for the LQ9D166! and i'll take a straight through! 12" a peice. thanks man!
        "if everything is under control, you're not going fast enough!"

        Comment


        • #5
          I'm in as well. I have a LQ9D161. Ur a real time saver!

          Comment


          • #6
            Will this hirose cable work for the Sharp LQ94D041 tft? It has a 31 pin connector, identical to the one on the controller. I think the controller is an Allens controller that you guys talk about (M1023 rev:F from datalux?)

            Thanks.
            -- pimpy

            Comment


            • #7
              Hey,

              I was wondering if you could get a cable for a LQ9DO2C to allen's controller, about 18".

              Thanks,

              Bryan
              :p "Which ones the any key?" Homer Simpson

              Comment


              • #8
                what sort of lead time area we looking at for this cable. i ask, because i might be getting one from mastero for a couple bucks more than the prices you quoted, but it will take a shile to get here. if i can get one sooner than the one he can sell me i would be interested. i would need a 1-1 which i can cut and rewire mid-cable. let me know about the lead time though.

                ~mike
                Single Member of the "1000 Post and No MP3 Car" Club
                PROJECT ON INDEFINATE HOLD... BOUGHT A HOUSE
                2000 Cavalier Z24 [###-------] Only 30% Done ... Still

                Comment


                • #9
                  Hi MP3,
                  Unfortunately like I said in the update above, I'm not sure what the lead time will be. With my contact person helping her daughter through surgery and chemo who knows when she'll be back. She's also going to be helping watch her granddaughter so I just don't know. Could be 2 to 3 weeks at least.

                  You may be best off going through Mastero for now.

                  Sorry about the delay and I wish I could give you more solid dates.

                  Kardas,
                  I'll ship to Australia, obviously it will cost more than shipping in the US but no problem for me. I'll just need the pertinent info (addy) and I'll check shipping costs for you. Also, how long a cable do you need?

                  Finally, if I ship you this cable, you have to promise to take me to a local bar so I can buy you some beers the next time I'm in AUS. I really want to visit your country someday! Maybe when my kids are in college 17 years from now!


                  Etrik,
                  The LQ9D166 has the same pinout as the LQ9D161. Which means you can purchase the same one I'm using which is already wired for that LCD. If you buy a straight through, you'll have to cut it in half and rewire. Which is OK with me if you want to do that. Just let me know.

                  Kelvinators,
                  You're in man! But how long???

                  Pimpybra,
                  I don't know if it will work with the Sharp LQ94D041 tft. If I were you I would order a straight through and then re wire if necessary. Try to find a pinout first though. Don't invest in a cable without knowing the pinout.

                  Ifdwolf,
                  Same response as Pimpybra's. I don't know if it will work with the Sharp LQ9D02C tft. If I were you I would order a straight through and then rewire if necessary. Try to find a pinout first though. Don't invest in a cable without knowing the pinout.


                  Here's what I've been told but I cannot guarantee it's true:

                  The straight through cable (1 to 1) will work with the following Sharp LCDs
                  LQ10D321
                  LQ10D346
                  LQ10D361
                  LQ10D367
                  LQ64P311

                  Now I've tried a straight through with my LQ10D367 and it works but I'm getting funny red pixels. Everything else looks really good included DVD but those damn red pixels are way to bright. I don't know if that's a controller problem or what but you should know that its not working perfect for me.

                  The straight through cable (1 to 1) is supposed to also work with the following Sharp LCDs but I don't know what the vcc requirements are. I heard that Allen's controller puts out 5V and some LCDs need 3V. Are these LCDs 3V??? I dont know.
                  LQ9D340
                  LQ10D341
                  LQ10D344
                  LQ10D345
                  LQ10D421
                  LQ64D341
                  LQ64D343
                  LQ084V1DG21
                  LQ104V1DG11
                  LQ104V1DG51
                  LQ104V7DS01

                  The custom wired cable for the LQ9D161 should work for the following LCDs
                  LQ9D031
                  LQ9P031
                  LQ9D151
                  LQ9D161 - I've tested and it works
                  LQ9D166 - I've tested and it works
                  LQ9D167
                  LQ9D169
                  LQ10D131
                  LQ64D141
                  LQ64D142
                  LQ64D167


                  If you have any doubts on whether these cables will work for you don't order one! If you think you can figure out the pinout yourself on an LCD that's not listed, order the 1 to 1 and rewire it, but please realize you're taking a chance. I will not refund money, especially after you cut a cable in half.

                  Finally, if you don't tell me the length you will get a 12" cable.

                  Hope that helps.

                  Pigseye
                  (Steve Hague)

                  Comment


                  • #10
                    pigseye,
                    i responded to your offer in my other thread, but i am saying it here also.

                    i will take a 1-1 cable, 18" in exchange for the serial-touch cable. if you change your mind and want the diference, i can send $$ to cover it. it wont hurt my feelings if you change your mind...

                    ~mike
                    Single Member of the "1000 Post and No MP3 Car" Club
                    PROJECT ON INDEFINATE HOLD... BOUGHT A HOUSE
                    2000 Cavalier Z24 [###-------] Only 30% Done ... Still

                    Comment


                    • #11
                      12 inch cable should be plenty long enough, and ill take you up on that beer!

                      thanks Kardas
                      http://austmp3car.tk

                      Comment


                      • #12
                        Hi Mike (MP3z24),
                        I'm just glad you're handling the serial cable part. It's greatly appreciated. I won't want your money for the difference.

                        Hopefully my contact person will be back in the office soon and can get our order together.

                        Again, my apologies for the delay.

                        Thanks Again,
                        Pigseye (Steve)

                        Comment


                        • #13
                          Thanks for letting me know Kardas.

                          Hope to buy you those beers.

                          Pigseye

                          Comment


                          • #14
                            i want one of eack pigseye ( prewired for 166 and 1 to 1) its basically a backup if i want to get another screen. thanks for all this work guys!!!!
                            "if everything is under control, you're not going fast enough!"

                            Comment


                            • #15
                              Great Etrik. You're on the list for 2

                              thanks,
                              Pigseye

                              Comment

                              Working...
                              X