Announcement

Collapse
No announcement yet.

FS/FT:**Full Carputer**

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • FS/FT:**Full Carputer**

    Sold!!!!!!!!!!!!!!!!!!!!
    Carputer
    M10000
    512ram
    120WD HD
    7" Lilliput
    M2-ATX
    Panasonic slot load DVD/CD-RW
    Turtle Beach USB sound card
    iguidence
    Emanage
    Innovate LM-1 w/AuxBox
    OBDII

  • #2
    are you interested in selling just the lilliput?
    1990 Jeep Cherokee
    2000 VW Golf TDI 4dr
    2005 VW GTI MKIV - SOLD

    Comment


    • #3
      pics dont work bro

      Comment


      • #4
        When/If you decide to part out, keep me in mind for this stuff.

        -M10000 Mobo
        -512 ram
        -Western Digital 120gig HD PM for everything thats on it...This thing is loaded!!
        -M2-ATX with a bunch of necessary wires
        -Panasonic Slot Load DVD drive with IDE adapter and IDE to USB wire..I fabricated a power wire for this too...so you can connect to M2-ATX power wires
        -GPS receiver and all three iguidence CD's
        -SIIG dual serial port so you can connect additional 9pin things like OBDII or the like
        -D-Link USB Radio
        MII-10000
        512 Ram
        BU-353 GPS Receiver
        Panasonic Slot-load DVD Player
        Limited Edition Black Ampie Case
        M1-ATX
        Lilliput 619 TS

        CENTERFUSE ROCKS!!!

        Comment


        • #5
          Pics will be up on and off...it's supported by geocities, so too much traffic means no pics until the clock resets...

          And I will be interested in selling anything and everything...I am definitely up for parting things out, but like I said, let me try the route easiest for me first, then on to the part out. You just need to understand that when we part out kits like this it gets down to the simple wires and usb doodads that are harder to sell. In a kit buy situation I can get rid of everything and know neither party got screwed.

          So just gimme a few days.

          Oh and Bilal, I am also speedr73 on aim...so realize that most of this is your stuff....if there is something you need back hit me up later. I just wanted you to know the main hardware in this kit was yours...I just can't go through with it at this time, but it all worked perfect!
          Carputer
          M10000
          512ram
          120WD HD
          7" Lilliput
          M2-ATX
          Panasonic slot load DVD/CD-RW
          Turtle Beach USB sound card
          iguidence
          Emanage
          Innovate LM-1 w/AuxBox
          OBDII

          Comment


          • #6
            would i be able to buy just the necesary compnents of the carputer?

            psu, mobo, proc, ram, hdd, and pretty much just the basic stuff that is needed for a running computer? (dont need the lcd and all that)

            do you have a case?

            Comment


            • #7
              No case
              Carputer
              M10000
              512ram
              120WD HD
              7" Lilliput
              M2-ATX
              Panasonic slot load DVD/CD-RW
              Turtle Beach USB sound card
              iguidence
              Emanage
              Innovate LM-1 w/AuxBox
              OBDII

              Comment


              • #8
                Originally posted by jcornwell
                When/If you decide to part out, keep me in mind for this stuff.

                -M10000 Mobo
                -512 ram
                -Western Digital 120gig HD PM for everything thats on it...This thing is loaded!!
                -M2-ATX with a bunch of necessary wires
                -Panasonic Slot Load DVD drive with IDE adapter and IDE to USB wire..I fabricated a power wire for this too...so you can connect to M2-ATX power wires
                -GPS receiver and all three iguidence CD's
                -SIIG dual serial port so you can connect additional 9pin things like OBDII or the like
                -D-Link USB Radio
                When you part out, how much would all of this run me?
                MII-10000
                512 Ram
                BU-353 GPS Receiver
                Panasonic Slot-load DVD Player
                Limited Edition Black Ampie Case
                M1-ATX
                Lilliput 619 TS

                CENTERFUSE ROCKS!!!

                Comment


                • #9
                  any of the cases at the mp3car.com store fit your stuff?

                  this is the right mobo correct?

                  http://www.mp3car.com/store/product_...4444797310f2f4

                  is the m2atx more than enough power for it?

                  Comment


                  • #10
                    Yeah that's the Mobo, and I bought the M2-ATX about two weeks ago from ebay. It's 160W power supply which is more power than the bigass opus external 150...so guys correct me if I'm wrong here, but yes it is more than enough power for this motherboard and pretty much anything else you need to power.

                    I was powering:
                    -Mobo
                    -DVD Drive
                    -HD

                    *-SoundCard
                    *-D-Link FM Radio These two were powered off the tiny USB hub in the pics, and I don't think it had enough power itself for the soundcar, dvd drive, gps and fm radio, so I think you need to get a more powerful usb hub if they exist or somehow power all those devices off the M2 independently. I never got around to messing with it. I just used the DVD drive and soundcard and it worked fine. I know this is a long post to answer a simple question, but I want to make sure you have all your info.

                    But again to anwer your question, simply, the M2 is plenty of power.

                    This is where I got it from, so I figured I would post the link to it...great price. And a little info on it.

                    http://cgi.ebay.com/M2-ATX-VIA-Mini-...QQcmdZViewItem

                    Here are more detailed specs-give it a sec to download.

                    http://www.mp3car.com/products/Power..._ATX_specs.pdf

                    And if that doesn't cover everything I will answer any other question you have.

                    -Ryan
                    Carputer
                    M10000
                    512ram
                    120WD HD
                    7" Lilliput
                    M2-ATX
                    Panasonic slot load DVD/CD-RW
                    Turtle Beach USB sound card
                    iguidence
                    Emanage
                    Innovate LM-1 w/AuxBox
                    OBDII

                    Comment


                    • #11
                      so how do you plug in the hard drives to the psu? is there a cable for it?

                      so if i just want to run a gps, 1 hdd and a dvd drive i could just get the m2 right? so how did you enclose all of your stuff?

                      Comment


                      • #12
                        the m2 will easily power all that...there was one big power cable to power everything...pic 5 all wires to the left...

                        I had everything in an old Motorola Cable box, but it really didn't workout that well...I would have ended up buying a case like the voompc or something
                        Carputer
                        M10000
                        512ram
                        120WD HD
                        7" Lilliput
                        M2-ATX
                        Panasonic slot load DVD/CD-RW
                        Turtle Beach USB sound card
                        iguidence
                        Emanage
                        Innovate LM-1 w/AuxBox
                        OBDII

                        Comment


                        • #13
                          regarding f/s stuff

                          i would be interesting in the m2 and also a question about the dlink radio how was the reception? do you recommend that for a first install? I say this because I have my car computer setup but no radio and it sucks without a radio. any suggestions.

                          Comment


                          • #14
                            ok so the big connector cable goes to the mobo correct? so where do the peripheral plugs (for hdd and stuff) plug into on the m2?

                            Comment


                            • #15
                              The peripherals are all off shoots of the main harness...in the 5th picture next to the neon IDE cable, you can see the harness...all those plugs are connected...off shoots of the connector that plugs into the PSU
                              Carputer
                              M10000
                              512ram
                              120WD HD
                              7" Lilliput
                              M2-ATX
                              Panasonic slot load DVD/CD-RW
                              Turtle Beach USB sound card
                              iguidence
                              Emanage
                              Innovate LM-1 w/AuxBox
                              OBDII

                              Comment

                              Working...
                              X