Announcement

Collapse
No announcement yet.

FS: Audison Amplifiers

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • FS: Audison Amplifiers

    SOLD!

    UPDATE: Lowered the prices

    Audison LRx 1.400 - $450 + shipping (MSRP $899.99)

    • 1 Ohm Stable
    • High Pass Crossover
    • Low Pass Crossover
    • Mono (single channel) Output
    • RCA Input
    • RMS Output 1 x 350 Watts @ 4 Ohms
    • RMS Output 1 x 650 Watts @ 2 Ohms
    • RMS Output 1 x 900 Watts @ 1 Ohm
    • Subsonic Filter

    LRx 1.400 is a mono amplifier especially designed to drive very low loads with thrilling energy reserve, built-in active filters and LRx typical compact size. Power supply and final stages use high current MOSFETs, which satisfy every power need. With its 900 watts at 1 Ohm, LRx 1.400 is the ideal amplifier to drive state-of-the-art subwoofers systems and to realise installations with very high SPL values and excellent timbre quality. It has a Hi-Pass stereo filter and a 24dB/Oct. Lo-Pass mono one; both are Butterworth, with independent adjustments. The subwoofer section has a bypass subsonic filter and a 24dB/Oct. slope one with Q factor adjustment and phase switch; thus, it always allows you to take full advantage of any speaker you are using.
    Audison LRx 4.300 - $450 + shipping (MSRP = $899.99)

    • 4 Channel Output
    • 2 Ohm Stable
    • Bridgeable 4 / 3 / 2 Channel Output
    • High Pass Crossover
    • Low Pass Crossover
    • RCA Input
    • RMS Output 4 x 65 Watts @ 4 Ohms
    • RMS Output 2 x 65 + 1 x 210 Watts @ 4 Ohms
    • RMS Output 2 x 210 Watts @ 4 Ohms
    • Subsonic Filter

    LRx 4.300 is a high power, very compact four channel amplifier. It can provide 65W continuous power per channel at 4 Ohms and 105W at 2 Ohms; if it is used in mono, power increases up to 210W, available on two channels. It is perfect to make complete high sound quality Front/Sub systems or to properly handle the upper ways of multi-amplified ones, attaining very high SPL values. It has two inputs, two Hi-Pass and Lo-Pass Butterworth crossovers with independent adjustments and one subsonic filter; all filters can be bypassed. Lo-Pass can be configured at 12dB/Oct. stereo in multiamplified systems and at 24dB/Oct. mono in Front/Sub ones.
    These amps have been used less than a year in a car that saw very few miles.

    I always take very good care of my equipment. These amps have never been pushed hard. They were the amps that I was running when I won the Intermediate Consumer 601+ class last year at USACi World Finals. I have the original boxes that they came in as well as the user manuals.

    If you would like to buy both amplifiers, I’ll let the pair go for $850 + shipping.

    I will get pictures taken tonight for anyone who is interested.

    If you have any questions, please feel free to E-mail/PM/IM me.

    Please do not ask how much shipping will be. I only charge what I am charged to ship items. I would imagine no more than $15.00 per amplifier for shipping. I will ship using any carrier you prefer and I will include insurance as these amps are too nice to risk loosing or damaging in shipping.

    I will accept PayPal, Check, or Money Order. If paying by check or money order, the funds will have to clear my bank before I ship the amps.
    Jan Bennett
    FS: VW MKIV Bezel for 8" Lilliput - 95% Finished

    Please post on the forums! Chances are, someone else has or will have the same questions as you!

  • #2
    if only i had 900 to spare........ thats some nice stuff for a good price

    Comment


    • #3
      :d
      Jan Bennett
      FS: VW MKIV Bezel for 8" Lilliput - 95% Finished

      Please post on the forums! Chances are, someone else has or will have the same questions as you!

      Comment


      • #4
        id be intrested in the 4.300 one pm sent

        Comment


        • #5
          responded...

          all amps still for sale.
          Jan Bennett
          FS: VW MKIV Bezel for 8" Lilliput - 95% Finished

          Please post on the forums! Chances are, someone else has or will have the same questions as you!

          Comment


          • #6
            I just thought I would update this thread to state that I have since packaged the amps up in their original packaging along with the original tools, fuses, and owners manuals. All the way down to the plastic that the amps are wrapped in.
            Jan Bennett
            FS: VW MKIV Bezel for 8" Lilliput - 95% Finished

            Please post on the forums! Chances are, someone else has or will have the same questions as you!

            Comment


            • #7






              pics!
              Jan Bennett
              FS: VW MKIV Bezel for 8" Lilliput - 95% Finished

              Please post on the forums! Chances are, someone else has or will have the same questions as you!

              Comment


              • #8
                UPDATE: Lowered the prices
                Jan Bennett
                FS: VW MKIV Bezel for 8" Lilliput - 95% Finished

                Please post on the forums! Chances are, someone else has or will have the same questions as you!

                Comment


                • #9
                  i may have a buyer for you
                  brb
                  New System in progress:
                  M10k
                  Phaze TD1500 ~> Dynaudio MD130
                  Phaze TD1500 ~> Seas g18rnx/p
                  Zapco Ref 500.1 ~ 12" tc-9
                  Behringer DCX2496 ~ Envision Electronics psu
                  Transflective Xenarc

                  My Car Pc Install
                  My Boat Pc worklog

                  Comment


                  • #10
                    is this buyer also on elite car audio by chance?
                    Jan Bennett
                    FS: VW MKIV Bezel for 8" Lilliput - 95% Finished

                    Please post on the forums! Chances are, someone else has or will have the same questions as you!

                    Comment

                    Working...
                    X