Announcement

Collapse
No announcement yet.

FS: 10.2" LCD Touch kit w/transflective enhancement

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • FS: 10.2" LCD Touch kit w/transflective enhancement

    Ok, I finally finished this project I first mentioned 8 months ago here: LINK

    I now have a 10.2" LCD Touch kit available, as well as a roof mount flip down version.
    The pictures are of the parts that are going into the flip down housing, so the open frame version has a slightly different controller setup, and is less bulky. Both use the same panel, which is an AU TSA2WD0105. 800x480 native resolution, will support 640x480 to 1024x768. This panel has the Transflective enhancement. Measured brightness after the enhancement is 600 nits. THis panel looks great! What I was even more impressed with is the viewing angle. After the enhancement, you can look at this panel directly from the side and read the panel. No BS! The colors are much more vivid, and look great.
    Has 1 vga (PC) input, 2 rca (video) inputs, and a USB touch screen.
    I am selling this 2 ways.

    as an open frame unit for 699.99
    as a roof mount flip down for 759.99
    either way you will get all required cables, a DC power regulator and drivers cd. Add 15.00 for an AC power supply.
    Shipping is NOT included in the prices, and will depend on your zip code and delivery method. These will only ship fully insured, and a signature will be required for delivery.
    Confirmed Address with Paypal from a Verified buyer, or Bank Drawn Cashier's Check. Business Check will be accepted on a case by case basis.

    The pictures are not the best, and the pic. of the 10.2" on is poor due to the camera.
    I also posted a comparison picture using an 8.4" Toshiba LCD Touch kit I have that is also transflective. These are also now available.
    I will post pics of the roof mount later today after I finish the assembly.
    Please PM with any questions or picture requests. I will be busy the next few days and may not check this post.
    Thank you!
    Attached Files

  • #2
    can you put together one without the transflective? I would like open frame, and touch... let me know

    Comment


    • #3
      Open Frame without transfective is 439.99
      Roof Mount without transflective is 499.99

      Comment


      • #4
        Do you have any pictures with direct sunlight on the screen?

        TIA

        Comment


        • #5
          do these by any chance have autoswitch from VGAtoRCA on signal like the xenarcs 700TSV? just curious.

          good stuff.
          99' V6 Solara SE.
          '05 CBR600RR
          Baltimore MD.
          Shuttle XPC| 512MB | 120GB 3.5" Seagate
          Opus 150W PS | Rikaline 6010 GPS
          7" Lilliput 619 | Centrafuse | IGuidance 3

          Comment


          • #6
            Originally posted by tomass View Post
            Do you have any pictures with direct sunlight on the screen?

            TIA
            Not yet. The weather has been **** to say the least lately. I am hoping for a break Monday in the cloud cover, and more importantly, an outside temp above 20 degrees. I am not a cold weahter fan, so I am not going to go set this up outside and freeze my nads off for a pic. Sorry, but if mother nature cooperates, then yes I will post pics.

            Comment


            • #7
              Originally posted by anik321 View Post
              do these by any chance have autoswitch from VGAtoRCA on signal like the xenarcs 700TSV? just curious.

              good stuff.
              Not sure. I wil set up a camera and see if it does. It will auto detect and turn on for vga, but not sure on the auto switch.

              Comment


              • #8
                Do you have the measurements (open frame)? I am curious to know if this will fit in my dash.

                ETA:
                panel measures 9.25" wide, 5.75" high and .23" thick
                viewable area is 8.75" x 5.25"

                Comment


                • #9
                  Originally posted by Booger View Post
                  Do you have the measurements (open frame)? I am curious to know if this will fit in my dash.

                  ETA:
                  panel measures 9.25" wide, 5.75" high and .23" thick
                  viewable area is 8.75" x 5.25"

                  Those measurement are correct, except the thickness. The .23" is without controller or inverter attached, and does not include the adapter board for the lcd driver circuit.
                  Add approx. 1/2" with said items attached.

                  Comment


                  • #10
                    I'll be interested to see some pics in the sun - I hope your weather has improved or will improve soon.
                    Carputer Progress:

                    Re-do fabrication of screen [DONE]
                    Add mini-USB and micro-USB power from M2-ATX [DONE]
                    Teardown PC [100%]
                    Add HDMI > VGA converter [0%]

                    Comment


                    • #11
                      I'd like to see what the drop down housing looks like....
                      MY NEWEST INSTALL:modded infiniti fx with big screen

                      first windows carpc install........my liquid cooled LVDS screen :D

                      Comment


                      • #12
                        how much for a 8.4" unit?

                        Comment


                        • #13
                          Originally posted by CJ8501 View Post
                          how much for a 8.4" unit?
                          599.99 + sh.
                          1 in stock, with the higher quality Fujitsu USB anti glare touch panel.
                          Thanks,

                          Originally posted by turbocad6 View Post
                          I'd like to see what the drop down housing looks like....
                          I will put it in my truck tonight and photograph Wed. It is supposed to be nice and sunny here. (thank God!!!!)

                          Originally posted by fatejd View Post
                          I'll be interested to see some pics in the sun - I hope your weather has improved or will improve soon.
                          see reply to turbocad6

                          Comment


                          • #14
                            how much for a 7" transflective touchscreen.. preferably one that would fit the Lilliput housing.. (considering i have a subaru... and want the Mechatroniks Bezel)
                            Current Setup - (as per PC specs on the left)
                            Future Setup - Commell LV-677, Dual Core2Duo 1.86ghz, 1gb ram, M2-ATX, Morex Mini-ITX case, Transflective screen

                            Comment


                            • #15
                              Originally posted by fire View Post
                              how much for a 7" transflective touchscreen.. preferably one that would fit the Lilliput housing.. (considering i have a subaru... and want the Mechatroniks Bezel)

                              Same as the 8.4", 599.99 plus shipping. LCD and touchscreen will fit directly into a Lilliput bezel. Button board may not, depending on the bezel you have.
                              Thanks

                              Comment

                              Working...
                              X