No announcement yet.

CCNA Cisco help needed...

  • Filter
  • Time
  • Show
Clear All
new posts

  • CCNA Cisco help needed...

    OK So i am completing my CCNA4 semester and my professor assigned us a case study. So i am just wondering with these ACL's i assigned, are they going to produce what is in the image?

    Here is what needs to be successful:

    And my ACL's are as follows:

    Phase 3 of project: (Configuring NAT, Frame Relay Simulation, and ACLs )
    For phase 3 i need to : Define an access control list, which will permit traffic from all internal ( addresses, and deny all other traffic. (Thats was done) is my ISP address/ is my default gatewa

    The ACL should permit HTTP access to the ISP, deny all other access to the ISP, and permit all traffic to destinations within the WAN.

    GALWAY(config)#access-list 101 permit tcp any eq 80
    GALWAY(config)#access-list 101 deny ip any
    GALWAY(config)#access-list 101 permit ip any any

    Are those ACL's correct??
    2002 Mitsubishi Galant
    Progress: 90% [-▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓- ->

    Carputer Specs:
    Via M10K
    512mb Ram
    60GB HDD
    Souund Blaster Audigy2 NX
    OPUS ITX PC Case