No announcement yet.

Finished my frame for my LCD....

  • Filter
  • Time
  • Show
Clear All
new posts

  • Finished my frame for my LCD....

    Project isn't done yet, but the hardest part for me is now done. I messed up a little with the vinyl wrap around the edge of the LCD. The vinyl got cut a little short and there are two locations where there is a bulge in the vinyl where I couldn't pull it tight.

    Anyway here is a pic....

    New site at

    2002 Toyota Tacoma Doublecab

  • #2
    try a hyperdermic syringe filled with glue.
    fill under bubbles, then press down, clean up.

    if its on an edge just put some glue under it and press it down
    [H]4 Life
    My next generation Front End is right on schedule.
    It will be done sometime in the next generation.
    I'm a lesbian too.
    I am for hire!