Announcement

Collapse
No announcement yet.

03 Vibe GT first install.

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 03 Vibe GT first install.

    Figure I'd post this in here. My first 'attempt' at a car PC.

    The bezel didnt turn out TOO bad, but theres a crack in the one side. Bumper repair isnt as flexible as you think.



    Mike

    My Rides:
    '03 Vibe GT!

    My AED GA!

  • #2
    Looks like its gettin off on the right foot. I will warn you though when you go to repair the crack yo uwill have to remove some of the bumper repair, and build it back up. I had the same issue with my first install when I used epoxy for the first time didnt mix enough and it never really hardened. Then cracked after the filler was on sanded repeted and did the same, then again. So I just redid the side and all was well. let me know wher eyou decide to put the pc.
    Aron
    New Ipad
    Zapco DSP-6SL
    Zapco Reference 360.4: H-Audio Soul, x2 right side
    Zapco Reference 360.4: H-Audio Soul, x2 left side
    Zapco Reference 500.1: JL Audio 10W3V3 Stealth box

    Comment


    • #3
      I'm thinking the glovebox. You said it will fit a mATX 9.5"x9.5"? Only thing is, theres no lock on there.
      Mike

      My Rides:
      '03 Vibe GT!

      My AED GA!

      Comment


      • #4
        yea thats true I wish there was a lock on mine also. Yip it will fit 9.5x9.5 (mines mATX). My plexi rest right before the opening for the lockan the back is all the way aginst the rear of the box. If you have any questions just shout
        Aron
        New Ipad
        Zapco DSP-6SL
        Zapco Reference 360.4: H-Audio Soul, x2 right side
        Zapco Reference 360.4: H-Audio Soul, x2 left side
        Zapco Reference 500.1: JL Audio 10W3V3 Stealth box

        Comment


        • #5
          I may go this glove box route. Just wondering about heating issues.
          Mike

          My Rides:
          '03 Vibe GT!

          My AED GA!

          Comment


          • #6
            Sweet bezel... took me about 4 attempts to get one I was happy with.. lol good luck with the rest of your project..

            Later...

            Comment


            • #7
              PSU came in yesterday.

              I havent really had time to work on the project. My other car is in need of 4 wheel hubs, two wheel cylinders and an exhaust system. So, thats getting done first, then back to the Vibe.
              Attached Files
              Mike

              My Rides:
              '03 Vibe GT!

              My AED GA!

              Comment

              Working...
              X