Announcement

Collapse
No announcement yet.

Removing 1998 Altima Original Radio/CD

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Removing 1998 Altima Original Radio/CD

    Hello. I am replacing the original Radio/CD in our '98 Altima GLE with a new unit of the same type. How do I remove the original unit? For example How do I remove the face plate and get access to the screws that hold the unit in place.

    Regards,
    Terry

  • #2
    to remove the faceplate on a factory unit Id use a hammer
    New Ipad
    Zapco DSP-6SL
    Zapco Reference 360.4: H-Audio Soul, x2 right side
    Zapco Reference 360.4: H-Audio Soul, x2 left side
    Zapco Reference 500.1: JL Audio 10W3V3 Stealth box

    Comment


    • #3
      Check one of the car audio forums and you might find instructions for your model. Otherwise, you will have to either buy instructions online or take your chances with a hammer.

      Comment


      • #4
        Pull the ash tray out and there will be a screw behind that, remove the screw and pull the panel. Then there's some screws for the bottom of the bezel, 2 I think. Then you've gotta pry out the air vents at the top of the dash. There's 2 more screws and the whole bezel should pull off. Then it's either 4 or 6 screws that hole a huge chunk of electronics in.

        Comment


        • #5
          Thank you Shadow. Much appreciated.

          T.

          Comment

          Working...
          X